A22-FA

A22 Standard pushbutton switches22 mm pushbutton switchA22 comes in a wide variety of shapes and colors and is installable in 22-dia. or25-dia. panel cutouts. The switch unit can easily be mounted.A22 is mounted using either open-type (fork-type) or closed-type (round-type) crimp terminals.• Finger-protection mechanism on switch unit provided as standard feature• Increased wiring efficiency with three-rowmountingof switch blocks• IP65 oil-resistant(non-lightedmodels), IP65 (lighted models)• Lighted and non-lighted, flat, projection and half- and full-guard versions• EN60947-5-1, UL andcUL approvedOrdering informationPushbuttonIllumination ColorOrder codeFlat type Projection type Full-guard type Half-guard typeSquare/projection typeSquare/full-guard typeRound/ mushroom type (30-dia. head)Round/ mushroom type (40-dia. head)Non-lightedRedA22-FRA22-TRA22-GR A22-HRA22-CRA22-DRA22-SRA22-MR GreenA22-FG A22-TG A22-TG A22-HG A22-CG A22-DG A22-SGA22-MG Yellow A22-FYA22-TYA22-GY A22-HY A22-CYA22-DYA22-SY A22-MY WhiteA22-FWA22-TWA22-GWA22-HWA22-CWA22-DWA22-SW A22-MW BlueA22-FA A22-TAA22-GAA22-HA A22-CAA22-DA A22-SAA22-MA Black A22-FB A22-TB A22-GB A22-HBA22-CBA22-DB A22-SBA22-MBLightedRed– A22L-TRA22L-GRA22L-HR A22L-CR A22L-DR– – Green– A22L-TG A22L-GG A22L-HGA22L-CGA22L-DG– – Yellow – A22L-TY A22L-GYA22L-HY A22L-CY A22L-DY – – White– A22L-TWA22L-GWA22L-HW A22L-CW A22L-DW– – Blue – A22L-TAA22L-GA A22L-HA A22L-CAA22L-DA– –Buttonsize in mm 29.7 dia. × 12D 29.7 dia. × 19D 29.7 dia. × 19D29.7 dia. × 12/18.5D 29.8 mm2 × 18D 29.8 mm2 × 18D30 dia. × 32D40 dia. × 32DSwitchesSwitch operationContacts Oder codeNon- lighted modelsLighted modelsLamp – LEDAC/DCLED lightOrder codeOperating voltage6 V12 V24 V24 VsuperbrightWithout voltage reduction unitWith voltage reduction unit110 VAC220 VACDC RedA22-6DR––– GreenA22-6DG –––Yellow *1A22-6DY –––Momentary SPST-NO A22-10MA22L-10M A22L-10M-T1A22L-10M-T2SPST-NCA22-01MA22L-01M A22L-01M-T1A22L-01M-T2Blue A22-6DA ––– AC Red A22-6AR––– GreenA22-6AG –––Yellow *1A22-6AY –––SPST-NO +SPST-NCA22-11M A22L-11M A22L-11M-T1A22L-11M-T2Blue A22-6AA –––DPST-NO A22-20MA22L-20M A22L-20M-T1A22L-20M-T2DPST-NC A22-02MA22L-02M A22L-02M-T1A22L-02M-T2Alternate SPST-NOA22-10A A22L-10A A22L-10A-T1A22L-10A-T2SPST-NCA22-01A A22L-01A A22L-01A-T1A22L-01A-T2AC and DC Red –A22-12ARA22-24AR A22-24ASRGreen–A22-12AGA22-24AGA22-24ASG Yellow *1–A22-12AYA22-24AY A22-24ASY Blue –A22-12AAA22-24AAA22-24ASASPST-NO + SPST-NCA22-11A A22L-11A A22L-11A-T1 A22L-11A-T2*1Used when the pushbutton color is yellow or whiteDPST-NO A22-20A A22L-20A A22L-20A-T1 A22L-20A-T2DPST-NC A22-02A A22L-02A A22L-02A-T1A22L-02A-T2Switch blocksStandard load Order codeSwitch blocks SPST-NOA22-10SPST-NC A22-01DPST-NO A22-20DPST-NCA22-02Lamp - incandescent lampOrder codeOperating voltage5 VAC/VDC12 VAC/VDC24 VAC/VDCA22-5A22-12 A22-24409A22 Standard pushbutton switchesAccessoriesItem Remarks Order codeLamp socketsDirect lighting Used when changing the lighting method (LED only)A22-TN Voltage-reduction lighting 220 VAC A22-T2Mounting latchesFor momentary modelsOrder mounting latches only when mounting switch blocks or lamp sockets are purchased individuallyA22-3200Legend plate framesLarge sizeWith snap-in legend plate, without text, blackSnap-in legend plate is acrylic A22Z-3333Without snap-in legend plate A22Z-3330Sealing capsFor projection modelsUsed to prevent dust or water from entering the operation unit (pushbutton, etc.), color: Opaque, material: SiliconA22Z-3600TThree-throw spacerUsed when mounting three non-lighted switchesA22Z-3003Control boxesExclusively for A22 One hole Do not use DPST-NO or DPST-NC switches,A22Z-B101(enclosures)Two holesmaterial: Polycarbonate resinA22Z-B102Three holes A22Z-B103Snap-in legend Standard sizeWithout textWhite Attached to the standard-size legend plate frame,A22Z-3443WplatesTransparentmaterial: AcrylicA22Z-3443CWhite text on black backgroundON A22Z-3443B-5OFF A22Z-3443B-6DOWNA22Z-3443B-8POWER ONA22Z-3443B-9Large sizeWithout textWhite Attached to the large-size legend plate frame,A22Z-3453WTransparentmaterial: AcrylicA22Z-3453CFor emergency60-dia. round plate with black letters on a yellow background“EMERGENCY STOP” is engraved on the plate.A22Z-3466-1stop switch90-dia. round plate with black letters on a yellow backgroundUsed as an emergency stop switch legend plateA22Z-3476-1Lamp extractorRubber tool used to easily replace lampsA22Z-3901Tightening wrench Tool used to tighten nuts from the back of the panelA22Z-3905SpecificationsRecognized organizationStandardsFile numberUL, cULUL508E41515– EN60947-5-1 –Contact ratings (standard load)LED indicators without voltage reduction unitRated voltageRated current Operating voltage6 VDC 60 mA (20 mA) 6 VDC ±5%6 VAC60 mA (20 mA) 6 VAC/VDC ±5%12 VAC/VDC 30 mA (10 mA) 12 VAC/VDC ±5%Rated carryRated voltage Rated current (A)current (A)AC15 (inductive load)AC12 (resistive load)DC13 (inductive load)DC12 (resistive load)24 VAC/VDC 15 mA (10 mA) 24 VAC/VDC ±5%Super-bright LED indicator10 24 VAC1010––110 VAC510––220 VAC36––380 VAC23––440 VAC12––24 VDC ––1,5 10110 VDC ––0,5 2220 VDC ––0,2 0,6380 VDC ––0,1 0,2Contacts (microload)Rated applicable load Minimum applicable load50 mA at 5 VDC (resistive load) 1 mA at 5 VDCRated voltageRated current Operating voltage24 VAC/VDC 15 mA 24 VAC/VDC ±5%Incandescent lampRated voltageRated current Operating voltage6 VAC/VDC200 mA5 VAC/VDC14 VAC/VDC 80 mA12 VAC/VDC28 VAC/VDC 40 mA24 VAC/VDC130 VAC/VDC 20 mA100 VAC/VDCVoltage-reduction lightingRated voltageOperating voltageApplicable lamp(BA8S/13_ gold)110 VAC95 to 115VACLED Lamp (A22-24A_)220 VAC190 to 230 VACItemPushbutton switches Emergency stop switches Knob-type selector switches Key-type selector switchNon-lightedLighted Non-lightedLighted Non-lighted LightedNon-lightedAllowable operatingMechanical Momentary operation:60 operations/minute max.30 operations/minute max.Manual release: 30 operations/minute max., automatic release: 30 operations/minute max.frequencyElectrical 30 operations/minutemax.30 operations/minute max.Durability(number ofMechanical Momentary operation:5,000,000Momentary operation: 300,000 500,000 100,000 500,000operations min.)Ambient temperatureElectrical500,000 300,000 500,000 100,000 500,000Operating –20 to 70°C–20 to 55°C–20 to 70°C–20 to 55°C –20 to 70°C–20 to 55°C–20 to 70°CStorage –40 to 70°C–40 to 70°C–40 to 70°C–40 to 70°C –40 to 70°C–40 to 70°C–40 to 70°CDegree of protection IP65(oil-resistant)IP65IP65(oil-resistant)IP65IP65 (oil-resistant)IP65IP65 (oil-resistant)Size in mm (in-panel only) 34H × 34W × 54.7D, 34H × 34W × 72.7D for DPST switches410