

| 매개변수 | 가치 |
|---|---|
| For DC see load limit curve, e.g., the following values: | |
| 유형 | block modular |
| 깊이 | 54 mm |
| 너비 | 53.6 mm |
| 키 | 126.1 mm |
| 현재 소모량 | max. 280 mA (all relays pick up) |
| 제품 유형 | I/O component |
| 장착 유형 | DIN rail mounting |
| 제품군 | Axioline F |
| 공급 전압 | 5 V DC (via bus base module) |
| 연결 이름 | Axioline F connector |
| 기사 수정 | 02 |
| 오염도 | 2 |
| 스트리핑 길이 | 8 mm |
| 연결 방식 | Bus base module |
| 장착 위치 | any (observe temperature and current derating) |
| 출력 개수 | 4 (floating) |
| 납품 범위 | including bus base module and Axioline F connectors |
| 스위칭 전류 | max. 8 A AC (cos phi = 1) |
| 주소 입력 영역 | 0 Byte |
| 치수에 대한 참고 사항 | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| 스위칭 용량 | max. 2000 VA |
| 변속 속도 | 100 Mbps |
| 치수 도면 | |
| 지원서 작성 시 유의사항 | Only for industrial use |
| 출력 주소 영역 | 1 Byte |
| 스위칭 주파수 | max. 6 (per minute) |
| 보호 수준 | IP20 |
| 인터페이스 수 | 2 |
| 과전압 범주 | III (EN 61010-2-201/UL 61010-2-201), up to 2000 m above sea levelII (EN 61010-2-201/UL 61010-2-201), up to 3000 m above sea level |
| 표준 명칭 | Ambient conditions |
| 연결 기술 | 2-conductor |
| 접점 스위칭 방식 | N/O contact |
| 기계적 수명 | 10x 106cycles |
| 필수 매개변수 데이터 | 1 Byte |
| 공기압(작동) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 표준/사양 | IEC 61850-3 |
| 도체 단면적 AWG | 24 ... 16 |
| 필수 구성 데이터 | 6 Byte |
| 도체 단면 강성 | 0.2 mm² ... 1.5 mm² |
| 연결 방법에 대한 참고 사항 | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature. |
| 도체 단면적, 강성 | 0.2 mm² ... 1.5 mm² |
| 주변 온도(작동) | -25 °C ... 60 °C (max. 6 A/channel for wall mounting on horizontal DIN rail; max. 4 A/channel for any mounting position) |
| 공기압(보관/운송) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 도체 단면적 유연함 | 0.2 mm² ... 1.5 mm² |
| 허용 습도(작동 조건) | 5 % ... 95 % (non-condensing) |
| 도체 단면적, 유연성 | 0.2 mm² ... 1.5 mm² |
| 테스트 전압: 릴레이 접점/로직 | 4 kV |
| 주변 온도(보관/운송) | -40 °C ... 85 °C |
| 허용 습도 (보관/운송) | 5 % ... 95 % (non-condensing) |
| 정상 작동 조건에서의 최대 전력 소모 | 1.4 W |
| 테스트 전압: 릴레이 접점/기능 접지 | 4 kV |
| IEC 60947-5-1에 따른 스위칭 용량 | 6 A (120 V (AC15)) |
| 테스트 전압: 릴레이 접점/릴레이 접점(개방 접점) | 1 kV, 50 Hz, 1 min. |
| 테스트 전압: 릴레이 접점/릴레이 접점(인접한 수형 커넥터) | 2.5 kV |
기술 사양 및 성능 데이터
설치 및 운영 가이드