


| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 표시하다 | 4 digit 7-segment red LED display(letter height: 8 mm0.315 in) |
| 제품 | Ultra-compact Digital Panel Controller |
| 재료 | Enclosure: Polycarbonate |
| 함수 | Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc. |
| 순중량 | Net weight: 55 g approx. |
| 부품 번호 | CA2-T3 |
| 제품명 | Ultra-compact Digital Panel Controller CA2 |
| 백업 메모리 | Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less |
| 제품 번호 | CA2-T3 |
| 공급 전압 | 24 V DC ± 10 % Ripple P-P 10 % or less |
| 연결 방식 | Terminal block connection |
| 전력 소비량 | 2.8 W or less |
| 설정 해상도 | 1 digit |
| 시작/유지 입력 | High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold |
| 표시 범위 | Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed) |
| 표시: 표시 정확도 | ±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃73.4 ± 41 ℉, 35 to 85 % RH |
| 아날로그 입력: 입력 범위 | ±1 V |
| 표시기: OUT2 작동 | Orange LED(Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display.Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.) |
| 아날로그 입력: 입력 방식 | Single end input |
| 표시기: OUT 1 작업 | Orange LED(Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display.Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.) |
| 아날로그 입력 : 입력 개수 | 1 No. |
| 아날로그 입력: 샘플링 속도 | Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec. |
| 임계값 설정 범위 | -9999 to +9999 |
| 디스플레이: 디스플레이 새로 고침 빈도 | Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec. |
| 아날로그 입력: 입력 임피던스 | 1 MΩ |
| 표시기: 극성 표시 | Red LED(lights up when the displayed value or the threshold value is negative) |
| 비교 출력 (OUT 1, OUT 2) | NPN open-collector transistor・ Maximum sink current: 100 mA・ Applied voltage: 35 V DC or less (between comparative output and GND)・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| 아날로그 입력: A/D 변환 방식 | Successive approximation method |
| 표시: 온도 특성 | ±0.5 % F.S. over 0 to +50 ℃+32 to +122 ℉ |
| 표시기: 자동 참조 작동 | Green LED(lights up when auto-reference function is used) |
| 환경 저항성: 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 환경 저항성: 충격 저항성 | 294 m/s2(30 G) acceleration in X, Y and Z directions three times each |
| 비교 출력(OUT 1, OUT 2): 히스테리시스 | Variable from 1 to 3,999 digits |
| 환경 저항성: 주변 온도 | 0 to +55 ℃+32 to +131 ℉(No dew condensation), Storage: -20 to +70 ℃-4 to +158 ℉ |
| 환경 저항성 : 진동 저항성 | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| 환경 저항성 : 절연 저항 | 100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| 비교 출력(OUT 1, OUT 2): 응답 시간 | 5 ms or less(when start / hold input is used at a sampling rate of 200 times/sec.) |
| 환경 저항성: 전압 내성 | 1,500 V AC for one min. between all supply terminals connected together and enclosure |
| 제로 조정 입력(0-ADJ.) / 자동 참조 입력(A-REF.) | Input condition: Non-voltage contact or NPN open-collector transistor inputSignal condition: Negative logic, Input time duration 10 ms or moreSignal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or openGuaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting) |
기술 사양 및 성능 데이터
설치 및 운영 가이드