서비스 시간: 월요일 ~ 금요일 9:00-18:00
CA2T4 - CA2T4 CA2-T4 PANASONIC Digital panel meter, signal input -5 to 5V, 4 digit LED, NPN
재고 있음 인기 제품

CA2T4

CA2T4 CA2-T4 PANASONIC Digital panel meter, signal input -5 to 5V, 4 digit LED, NPN

$0.00USD
3889개 재고
주요 사양
목:Specifications
표시하다:4 digit 7-segment red LED display(letter height: 8 mm0.315 in)
제품:Ultra-compact Digital Panel Controller
재료:Enclosure: Polycarbonate
공급업체 정보
PANASONIC
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원

기술 사양

매개변수가치
Specifications
표시하다4 digit 7-segment red LED display(letter height: 8 mm0.315 in)
제품Ultra-compact Digital Panel Controller
재료Enclosure: Polycarbonate
함수Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
순중량Net weight: 55 g approx.
부품 번호CA2-T4
제품명Ultra-compact Digital Panel Controller CA2
백업 메모리Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
제품 번호CA2-T4
공급 전압24 V DC ± 10 % Ripple P-P 10 % or less
연결 방식Terminal block connection
전력 소비량2.8 W or less
설정 해상도1 digit
시작/유지 입력High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
표시 범위Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
표시: 표시 정확도±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃73.4 ± 41 ℉, 35 to 85 % RH
아날로그 입력: 입력 범위±5 V
표시기: OUT2 작동Orange LED(Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display.Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
아날로그 입력: 입력 방식Single end input
표시기: OUT 1 작업Orange LED(Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display.Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
아날로그 입력 : 입력 개수1 No.
아날로그 입력: 샘플링 속도Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
임계값 설정 범위-9999 to +9999
디스플레이: 디스플레이 새로 고침 빈도Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
아날로그 입력: 입력 임피던스1 MΩ
표시기: 극성 표시Red LED(lights up when the displayed value or the threshold value is negative)
비교 출력 (OUT 1, OUT 2)NPN open-collector transistor・ Maximum sink current: 100 mA・ Applied voltage: 35 V DC or less (between comparative output and GND)・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
아날로그 입력: A/D 변환 방식Successive approximation method
표시: 온도 특성±0.5 % F.S. over 0 to +50 ℃+32 to +122 ℉
표시기: 자동 참조 작동Green LED(lights up when auto-reference function is used)
환경 저항성: 주변 습도35 to 85 % RH, Storage: 35 to 85 % RH
환경 저항성: 충격 저항성294 m/s2(30 G) acceleration in X, Y and Z directions three times each
비교 출력(OUT 1, OUT 2): 히스테리시스Variable from 1 to 3,999 digits
환경 저항성: 주변 온도0 to +55 ℃+32 to +131 ℉(No dew condensation), Storage: -20 to +70 ℃-4 to +158 ℉
환경 저항성 : 진동 저항성10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each
환경 저항성 : 절연 저항100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
비교 출력(OUT 1, OUT 2): 응답 시간5 ms or less(when start / hold input is used at a sampling rate of 200 times/sec.)
환경 저항성: 전압 내성1,500 V AC for one min. between all supply terminals connected together and enclosure
제로 조정 입력(0-ADJ.) / 자동 참조 입력(A-REF.)Input condition: Non-voltage contact or NPN open-collector transistor inputSignal condition: Negative logic, Input time duration 10 ms or moreSignal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or openGuaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)

제품 설명

More details
주요 기능
  • 산업 등급 품질
  • RoHS 준수
  • CE 인증
  • 1년 보증

제품 문서

데이터시트

기술 사양 및 성능 데이터

사용자 매뉴얼

설치 및 운영 가이드

Top