


| 매개변수 | 가치 |
|---|---|
| NPN | - |
| COM3 | E3S-DCP21-IL3 |
| 목 | Sensing method |
| 렌즈 | Methacrylic resin (PMMA) |
| 모델 | E3S-DCP21-IL2 |
| 산출 | Push-pull |
| 버튼 | Elastomers |
| 보드율 | E3S-DCP21-IL3: COM3 (230.4 kbps), E3S-DCP21-IL2: COM2 (38.4 kbps) |
| 커넥터 | Diecast zinc (nickel-plated brass) |
| 재료 | Case |
| 지표 | ABS |
| 데이터 길이 | PD size: 8 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) |
| 응답 시간 | Operate or reset: 50 µs max. for each (2-point teaching mode)Operate or reset: 150 µs max. for each (1-point teaching mode) |
| 감지 방법 | Appearance |
| 감지 거리 | 10±3 mm (White paper 10 ×10 mm) |
| 최소 사이클 시간 | E3S-DCP21-IL3 (COM3): 1.5 ms, E3S-DCP21-IL2 (COM2): 4.8 ms |
| 보호 회로 | Power supply reverse polarity protection, output short-circuit protection and output incorrect connection protection |
| 보호 수준 | IEC 60529 IP67 |
| 전원 공급 전압 | 10 to 30 VDC±10% (Ripple (p-p) 10% max.) |
| IO-Link의 주요 기능 | Operation mode switching between NO and NCTimer function of the control output and timer time selecting function (Select a function from disabled, ON delay, OFF delay, one-shot or ON/OFF delay.) (Select a timer time of 1-5000 ms.)Selecting function of ON delay timer time for instability (0 (disabled)-1000 ms)Monitor output function (PD output indicating a relative detection quantity)Energizing time read-out function (unit: h)Initialize the settings function “Restore the factory settings” |
| 주변 온도 범위 | Operating: −10 to 55°C; Storage: −25 to 70°C (with no icing or condensation) |
| 광원(파장) | Red LED (635 nm), Green LED (525 nm), Blue LED (465 nm) |
| 반점 크기(참고값) | 1 × 4 mm |
| 통신 사양 | IO-Link specification |
| 확산 반사(마크 감지) |
기술 사양 및 성능 데이터
설치 및 운영 가이드