


| 매개변수 | 가치 |
|---|---|
| Fiber amplifierconnector | |
| 목 | Functions |
| 모양 | Type |
| 함수 | Power tuning |
| 사전 배선됨 | AND/OR output |
| NPN 출력 | PNP output |
| 입출력 설정 | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| 응답 시간 | Super-high-speed mode |
| 표준 모드 | 1 ms for operation and reset respectively |
| 타이머 기능 | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| 디지털 디스플레이 | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| 보호 회로 | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| 감도 설정 | Teaching and digital up/down keys |
| 보호 수준 | IEC 60529 IP50 (with protective cover attached) |
| 고해상도 모드 | 4 ms for operation and reset respectively |
| 전원 공급 전압 | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| 광섬유 증폭기 커넥터1 | AND/OR output |
| 광원(파장) | Red LED (650 nm) |
| M8 플러그 커넥터(4핀)가 있는 30cm PVC 케이블 | E3X-CN21-M3J-2 0.3M |
기술 사양 및 성능 데이터
설치 및 운영 가이드