재고 있음 인기 제품
FX311B
FX311B FX-311B PANASONIC Fiber amplifier, blue LED, NPN, 12-turn potentiometer, connector type
$0.00USD
3648개 재고
주요 사양
목:Specifications
산출:NPN open-collector transistor• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
무게:Net weight: 15 g approx., Gross weight: 20 g approx.
세부:NPN output
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 산출 | NPN open-collector transistor• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)] |
| 무게 | Net weight: 15 g approx., Gross weight: 20 g approx. |
| 세부 | NPN output |
| 제품 | Manually Set Fiber Sensor |
| 재료 | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate |
| 부품 번호 | FX-311B |
| 케이블 길이 | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| 제품명 | Manually Set Fiber Sensor FX-311 |
| 응답 시간 | 150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch |
| 제품 번호 | FX-311B |
| 공급 전압 | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| 타이머 기능 | Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective |
| 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 충격 저항 | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| 연결 방식 | Connector(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft) |
| 전력 소비량 | 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage) |
| 주변 조도 | Incandescent light: 3,000 ℓx at the light-receiving face |
| 주변 온도 | -10 to +55 ℃ -14 to +131 ℉(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)Storage: -20 to +70 ℃ -4 to +158 ℉ |
| 작동 표시기 | Orange LED (lights up when the output is ON) |
| 안정성 지표 | Green LED (lights up under stable light received condition or stable dark condition) |
| 감도 조절기 | 12-turn potentiometer with indicator (Pointer part: red backlight)(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted. |
| 진동 저항 | 10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each |
| 절연 저항 | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 출력:출력 작업 | Selectable either Light-ON or Dark-ON, with selection switch |
| 전압 내성 | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 방출 소자(변조됨) | Blue LED |
| 출력: 단락 보호 | Incorporated |
| 자동 간섭 방지 기능 | Incorporated (Up to 4 sets of fiber heads can be mounted close together.)(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention. |
| 발광 소자(변조됨): 최대 발광 파장 | 470 nm 0.019 mil |
제품 설명
More details
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
