

| 매개변수 | 가치 |
|---|---|
| 7 Nm (Support: EN 62444) | |
| 색상 | Brass color |
| 차폐된 | yes |
| 애플리케이션 | EMC |
| 할로겐 프리 | no |
| 제조업체 | BIMED |
| 제품 유형 | Cable screw gland |
| 나사산 피치 | 1.5 mm |
| 조립 참고 사항 | Method 1Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring.Method 2Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |
| 구멍 직경 | 16.1 mm ... 16.2 mm |
| 기사 수정 | 00 |
| 조임 토크 | 7 Nm (Union nut) |
| 치수 도면 | |
| 보호 수준 | IP68 (5 bar, 30 minutes) |
| 씰 재질 O링 | Perbunan |
| 렌치 크기, 지지대 | 20 mm |
| 설계, 응력 완화 | A |
| 렌치 크기, 유니온 너트 | 20 mm |
| 외함 등급(NEMA) | 4X |
| 외부 케이블 직경 | 5 mm ... 10 mm |
| 충격 영향 범주 | 6 |
| 제조업체 명칭 | BMEM-E1 |
| 밀봉재 케이블 밀봉 | CR |
| 육각형 각도 치수 | 22 mm |
| 재질 압축 링 | PA 6 |
| 나사형 연결부 | M16 x 1.5 |
| 나사 연결용 재료 | Brass, nickel-plated |
| 장력 완화 실행 | A |
| 주변 온도(작동) | -40 °C ... 100 °C (static) |
| 연결 실의 길이 | 7 mm |
| 케이블 외피를 제외한 케이블 직경 | 4 mm (Diameter of braided shield) |
| 스트레인 릴리프 클립의 클램핑 범위 | 6.00 mm ... 10.00 mm (for UL 514 B) |
기술 사양 및 성능 데이터
설치 및 운영 가이드