G34960002700

Dupline® Plug & Play Master ModuleInterface forGE-Fanuc PLC Type G 3496 0002• GE-Fanuc master• Plug and play: Automatic communication with specificPLC/Controllers• Built-in normal Dupline® Channel Generator• 128 I/O’s and DC power supply on 3 wires• RS232/RS422/RS485 port for interfacing to control sys- tem• Split-I/O mode selectable (128 inputs and 128 outputs)• LED-indications for supply, Dupline carrier and Com- port TX• Galvanically isolated Com-port supplied by internal DC/ DC converterProduct DescriptionOrdering KeyG 3496 0002 700G 3496 0002 is designed as a cost-effective solution for interfacing Dupline® I/O’sto a GE-Fanuc PLC. It performs three functions: Dupline® channel generator, powersupply synchronization (enables 3-wire system with supply) and RS232/RS422/ RS485 interface.Type: Dupline® H4-Housing Combined module Interface typeDC supplyType SelectionSupplyPLC Interface Conformance Ordering no.20-30 VDCGE-Fanuc Micro 90 & 90-30G 3496 0002 700Input/Output SpecificationsPower outputOutput voltage20-30 VDC (pulsating)Output current< 3.0 A @ 50ºCShort circuit protection 4 A quick acting fuseOutput voltage drop < 1.0 VDupline®carrierOutput voltage8.2 V (pulsating)Current < 60 mAShort circuit protection YesScan time128 channels132.2 ms64 channels 69.8 msCommunication portStandard RS232/RS422/RS485Split I/O modeYes, selectableNormal Dupline modeYes, selectableConnection 9 pole female Sub-DDielectric voltageCom-port Dupline® 1 kVAC (rms)ProtocolSNP/Modbus-RTU(Function code 01 & 15)Input/Output Specifications (Cont.)Pin assignment2-wire RS 485S/R Data line + (B)Pin 3S/R Data line - (A) Pin 8GND Pin 54-wire RS 485/RS 422R Data line + (B)Pin 3R Data line - (A) Pin 8S Data line + (B)Pin 2S Data line - (A) Pin 7Direction Pin 4(ConnecttoGNDpin5whenusing4-wirecommu-nication)RS 232TXPin 1RXPin 9GND Pin 5Supply SpecificationsBaud rate19200(9600forModbus-RTU protocol)Data bits 8Start bit 1Stop bit 1ParityOddFlow-controlNonePower supplyOvervoltage cat. III (IEC 60664)Operational voltage (Vin) 20-30 VDC Reverse polarity protectionNoneCurrent consumption< 150 mA + Power loadPower dissipation < 5 W Transient protection voltage800 V Dielectric voltageSupply - Dupline® NoneSupply - com-port1 kVAC (rms)Note: Use individual power supplies for all G349600xx700, as the input are not galvanic isolated from each other.Specifications are subject to change without notice (04.12.2014)1