서비스 시간: 월요일 ~ 금요일 9:00-18:00
HBG-100-60AB - HBG-100-60AB MEANWELL AC-DC Single output LED driver Constant current (CC) with built-in PFC, Output 60 VDC ..
재고 있음 인기 제품

HBG-100-60AB

HBG-100-60AB MEANWELL AC-DC Single output LED driver Constant current (CC) with built-in PFC, Output 60 VDC ..

$0.00USD
4221개 재고
주요 사양
이름 (상세 정보):HBG-100-60AB
상태 (세부 정보):New
형식 (세부 정보):Box
시리즈 (상세 정보):HBG-100-AB
공급업체 정보
MEANWELL
MEANWELL
제품: 6448
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원

기술 사양

매개변수가치
이름 (상세 정보)HBG-100-60AB
상태 (세부 정보)New
형식 (세부 정보)Box
시리즈 (상세 정보)HBG-100-AB
승인 내역 (상세 정보)CCC, CE, EAC, ENEC, UL
전력(와트) (상세 정보)96,00
규정 (세부 사항)1-10V, Resistance 0-100K, PWM Signal 10V
세부정보 (Subformato)IP65
너비(mm) (상세 정보)130.00
높이(mm) (상세 정보)66.50
AC 입력 최대값 (상세 정보)305,00
AC 입력 최소값 (상세 정보)90,00
지원서 (상세 정보)Lighting
제조업체 (상세 정보)MEAN WELL
제품 유형 (상세 정보)LED Driver
격리(V) (세부 사항)3.750,00
최대 출력(와트) (상세 정보)Ninety six
입력 커넥터(세부 정보)Cable
입력 주파수 (상세 정보)50 Hz, 60 Hz
장문/배경 (세부 정보)130.00
상세 설명 (세부 정보)LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format circular plastic patentedIP65.Input range90-305Vca47-63Hz.Output in constant current1600mA.Adjustable by external potentiometer (1000-1600mA).Range of output voltage with current mode constant36 to 60Vccaccording to demand load.Power:96W.Efficiency typical:91,5%.Potentiometer:This model incorporates external potentiometer that allows us to regulate the maximum output current.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0.96to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Diameter x Height):130 x 66,5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. In this version AB, the output current can be adjusted byexternal potentiometerlocated in the housing of the source, in additionhave regulation 1-10V, 10V PWM, or resistance.With cover, round, plastic IP65. The series HBG is specially designed for the bells and LED spotlights, scenarios, and bays. Intended for applications in dry, damp or wet, both in exterior and in interior. Input class I with grounding.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.
출력 커넥터(세부 정보)Cable
입력 유형 CA (세부 정보)Single-phase
보증 기간(년) (상세 정보)5,00
원산지 (상세 정보)China
출력 전류(mA) (상세 정보)1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550, 1600
최소 출력 강도(mA) (상세 정보)1.000,00
최대 출력 강도(mA) (상세 정보)1.600,00

제품 설명

More details
주요 기능
  • 산업 등급 품질
  • RoHS 준수
  • CE 인증
  • 1년 보증

기술 세부 정보

LED driver dimmable.

제품 문서

데이터시트

기술 사양 및 성능 데이터

사용자 매뉴얼

설치 및 운영 가이드

Top