재고 있음 인기 제품
HBG-160P-60B
HBG-160P-60B MEANWELL AC-DC Single output LED driver (CC), Circular PCB open frame type, output 60V / 2.6A, ..
$0.00USD
3052개 재고
주요 사양
이름:HBG-160P-60B
상태:Recommended Model
체재:Open Format
시리즈:HBG-160P-B
공급업체 정보
MEANWELL
제품: 6448
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 이름 | HBG-160P-60B |
| 상태 | Recommended Model |
| 체재 | Open Format |
| 시리즈 | HBG-160P-B |
| 밝기 조절 | 1-10V, Resistance 0-100K, PWM Signal 10V |
| 승인 | CCC, CE, ENEC, UL |
| 전력(와트) | 156,00 |
| 너비(mm) | 124.60 |
| 높이(mm) | 34.00 |
| AC 입력 최대 | 305,00 |
| AC 입력 최소 | 90,00 |
| 응용 프로그램 | Lighting |
| 제조업체 | MEAN WELL |
| 제품 유형 | LED Driver |
| 격리(V) | 3.750,00 |
| 최대 출력(와트) | One hundred fifty six |
| 입력 커넥터 | Cable |
| 입력 주파수 | 50 Hz, 60 Hz |
| 긴/배경 | 124.60 |
| 상세 설명 | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Circular format is open, typePCBS.Input range90-305Vca47-63Hz.Output in Constant Current2,6 A.Range of Output Voltage with Current mode Constant36 to 60Vccaccording to demand load.Maximum Power:156W.Efficiency typical:93,5%.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0.95to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+45ºC.Dimensions (Diameter x Height):124,6 x 34mm.5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 60V if the load is powered at constant voltage and does not overcome the maximum output power.With housing circular open plastic, IP67 rated. The series HBG is specially designed for the bells and LED spotlights, scenarios, and bays. Intended for applications in dry, damp or wet, both in exterior and in interior. Input class I with groundand this version P, is formatted as open type PCB.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| 출력 커넥터 | Cable |
| 입력 유형 CA | Single-phase |
| 보증 기간(년) | 5,00 |
| 원산지 | China |
| 출력 전류 mA | Two thousand six hundred |
| 최소 출력 강도(mA) | 2.600,00 |
| 최대 출력 강도(mA) | 2.600,00 |
제품 설명
More details
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
기술 세부 정보
LED driver dimmable.
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
