

| 매개변수 | 가치 |
|---|---|
| Can only be used in plastic housing | |
| 유형 | COM |
| 너비 | 22.4 mm |
| 키 | 44.1 mm |
| 길이 | 41.6 mm |
| 시리즈 | HC-COM |
| 일반적인 | Connectors may be operated only when there is no load/voltage. |
| 애플리케이션 | Power/signal |
| 제품 유형 | Contact insert with a fixed no. of positions |
| 정격 전류 | 40 A (power contacts) |
| 접촉 직경 | 4 mm |
| 접촉 재료 | Copper alloy |
| 연락처 | 1 - 4 (power contacts) |
| 조임 토크 | 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) |
| 연결 프로필 | 4+2+PE |
| 오염 정도 | 3 |
| 치수 도면 | |
| 직위 수 | 6 |
| 정격 서지 전압 | 6 kV (Phase-phase power contacts) |
| 과전압 범주 | III |
| 조립 설명서 | To ensure correct use, installation in housing with IP54 protection or better is required |
| 연결 기술 | Crimp connection (power contacts) |
| 접촉 재료 유형 | turned |
| 전원 접점 수 | 4 |
| 정격 전압(III/3) | 400 V (Phase-ground power contacts) |
| 표준/규정 | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| 도체 단면적 | 1.5 mm² ... 10 mm² (power contacts) |
| 제어 접점 수 | 2 |
| 접촉 캐리어 재료 | PC |
| 접촉면 재질 | Ag (alternatively Au) |
| 삽입/제거 주기 | ≥ 500 |
| 연결 단면 AWG | 16 ... 8 (power contacts) |
| 주변 온도(작동) | -40 °C ... 125 °C (including heating up of contacts) |
| 표준에 따른 연결 | IEC / EN |
| 전원 접점용 정격 전압 | 400/690 V |
| 위치당 연결 수 | 1 |
| UL 94에 따른 난연성 등급 | V0 |
| 개별 전선의 피복 벗기기 길이 | 9 mm (for 1.5 ... 2.5 mm²) |
| 접촉면 재질, 전력 접점 | Ag |
| 접촉면 재질, 접촉 제어 | Ag (alternatively Au) |
기술 사양 및 성능 데이터
설치 및 운영 가이드