재고 있음 인기 제품
HC-K 6/12-EBUS
HC-K 6/12-EBUS 1636363 PHOENIX CONTACT Contact insert
$127.97USD
114개 재고
주요 사양
:Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use.The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque.
유형:B16
너비:34 mm
키:47 mm
공급업체 정보
제품: 0
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use.The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque. | |
| 유형 | B16 |
| 너비 | 34 mm |
| 키 | 47 mm |
| 길이 | 84.1 mm |
| 시리즈 | HC-K |
| 일반적인 | For HEAVYCON ADVANCE and HEAVYCON housing of type B16/B32, axial connection for 2 mm Allen wrench |
| 애플리케이션 | Power/signal |
| 제품 유형 | Contact insert with a fixed no. of positions |
| 조립 참고 사항 | To ensure correct use, installation in housing with IP54 protection or better is required |
| 정격 전류 | 40 A (power contacts) |
| 기사 수정 | 04 |
| 접촉 직경 | 4 mm |
| 접촉 재료 | Cu alloy |
| 연락처 | 1 - 6 (power contacts) |
| 드라이버 날 | 0.5 x 3.5 mm (control contacts) |
| 조임 토크 | 2 Nm ... 2.5 Nm (PE connection) |
| 연결 프로필 | 6+12+PE |
| 오염 정도 | 3 |
| 치수 도면 | |
| 직위 수 | 18 |
| 정격 서지 전압 | 8 kV (power contacts) |
| 과전압 범주 | III |
| 연결 기술 | Axial screw connection (power contacts) |
| 접촉 재료 유형 | turned |
| 전원 접점 수 | 6 |
| 정격 전압(III/3) | 690 V |
| 도체 단면적 | 2.5 mm² ... 10 mm² (power contacts) |
| 제어 접점 수 | 12 |
| 접촉 캐리어 재료 | PC |
| 삽입/제거 주기 | ≥ 500 |
| 연결 단면 AWG | 12 ... 8 (power contacts) |
| 주변 온도(작동) | -40 °C ... 125 °C |
| 수평 방향으로 드릴 구멍 간격 | 77.5 mm |
| 전원 접점용 정격 전압 | 230/400 V |
| UL 94에 따른 난연성 등급 | V0 |
| 개별 전선의 피복 벗기기 길이 | 8 mm +1 mm (Power 6 mm² ... 10 mm²) |
| 접촉면 재질, 전력 접점 | Ag |
| 접촉면 재질, 접촉 제어 | Ag |
제품 설명
Contact insert, number of poles: 6+12+PE, size: B16, power contacts: 6, control contacts: 12, Female, Axial screw connection, 690 V, 40 A, 2.5 mm² ... 10 mm², application: Power/signal
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
