

| 매개변수 | 가치 |
|---|---|
| GTIN | 4055626112947 |
| 주문키 | 1417433 |
| 카탈로그 페이지 | Page 583 (C-2-2017) |
| 포장 단위 | 5 pc |
| 원산지 | PL (Poland) |
| 관세 번호 | 85389099 |
| (주변 환경 조건) | 4 mm |
| 최소 주문 수량 | 5 pc |
| 너비 (주요 상업 데이터) | 34.1 mm |
| (표준 및 규정) | No hazardous substances above threshold values |
| 높이 (주요 상업 데이터) | 27.2 mm |
| 길이 (주요 상업 데이터) | 14.6 mm |
| (기계적 특성) | Use of HC-CST-MOD (1636127) coding pins and HC-CBU-MOD (1636130) coding sockets has been prescribed. |
| 연결 프로필(치수) | 3 |
| 참고 (기계적 특성) | For HEAVYCON ADVANCE housing type B6 to B24 and HEAVYCON housing type B6 to B48. HEAVYCON HC-M-B...-MF... module carrier frame required, HC-M-PN... pneumatic pins and sockets are not supplied as standard. |
| 색상(기계적 특성) | light gray |
| 접촉 캐리어 재료(일반) | PC |
| 시리즈(기계적 특성) | HC-M-03-PN |
| 개당 중량 (포장 제외) | 5.730 g |
| 접촉 직경(주변 환경 조건) | 5.2 mm |
| 중국 RoHS(표준 및 규정) | Environmentally friendly use period: unlimited = EFUP-e |
| 연결(기계적 특성) | - Snap the pneumatic contact and module together. Insert the contact into the module from the front- Place the modules assembled with the contacts in the module carrier frame.- The pneumatic tubes are pushed onto the pneumatic contact from the back of the module.The medium-sized module slots and sleeves/coupling housing with straight cable outlet direction are recommended. |
| 일체형 밸브(기계적 특성) | No |
| 삽입/제거 주기(주변 환경 조건) | ≥ 500 |
| 조립 설명서 (기계적 특성) | To ensure correct use, installation in housing with IP54 protection or better is required |
| 모듈 슬롯 개수 (기계적 특성) | 1 |
| UL 94에 따른 난연성 등급(재료 데이터) | V0 |
| 주변 온도(작동) (전기적 특성) | -40 °C ... 80 °C |
| 압력 호스 연결부의 내경 (주변 환경 조건) | 1.6 mm |
| UL 94에 따른 난연성 등급(기계적 특성) | V0 |
기술 사양 및 성능 데이터
설치 및 운영 가이드