재고 있음 인기 제품
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00USD
3584개 재고
주요 사양
목:Specifications
무게:Net weight: 300 g approx.
세부:Controller
제품:Ultra High-speed Laser Displacement Sensor [CCD Style]
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 무게 | Net weight: 300 g approx. |
| 세부 | Controller |
| 제품 | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| 종범 | - |
| 부품 번호 | HL-C1C-M |
| 알람 출력 | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| 케이블 길이 | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| 제품명 | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| 샘플링 속도 | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| 홀드 기능 | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 제품 번호 | HL-C1C-M |
| 공급 전압 | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| 디지털 필터 | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 지표: DARK | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| 입력이 켜짐(ON)으로 설정됨(Zero set) | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| 교정: 스팬 | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 제로 설정 OFF 입력 | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| 교정: 시프트 | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 현재 소비량 | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| 지표: 밝음 | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| 계산 함수 | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 직렬 입력/출력 | RS-232C |
| 커넥터 센서 헤드 | Maximum 2 sensor heads |
| 아날로그 출력: 전류 | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| 아날로그 출력: 전압 | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| 평균 샘플 수 | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 판단 결과 (O1, O2) | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| 표시기: 레이저 방출 | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| 온도 특성 | plus or minus 0.01 % F.S./degrees |
| 타이밍 입력(레이저 방출) | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| 알람 출력: 출력 작동 | Opened when the amount of light is excessive or insufficient. |
| 경보 출력: 단락 보호 | Incorporated |
| 환경 저항성: 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 환경 저항성: 충격 저항성 | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| 판단 출력(O1, O2): 출력 연산 | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| 환경 저항성: 주변 온도 | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| 환경 저항성 : 진동 저항성 | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| 판단 결과(O1, O2): 활용 범주 | DC-12 or DC-13 |
| 판단 출력(O1, O2): 단락 보호 | Incorporated |
제품 설명
More details
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
