


| 매개변수 | 가치 |
|---|---|
| 이름 | HLG-80H-C350AB |
| 상태 | New |
| 체재 | Box |
| 시리즈 | HLG-80H-C-AB |
| 밝기 조절 | 1-10V, Resistance 0-100K, PWM Signal 10V |
| 승인 | CCC, CE, EAC, MM, PSE, RCM, UL |
| 전력(와트) | 89,95 |
| 서브포르마토 | IP65 |
| 너비(mm) | 61.50 |
| 높이(mm) | 38.80 |
| AC 입력 최대 | 305,00 |
| AC 입력 최소 | 90,00 |
| 응용 프로그램 | Lighting |
| 제조업체 | MEAN WELL |
| 제품 유형 | LED Driver |
| 격리(V) | 3.750,00 |
| 최대 출력(와트) | 89.95 |
| 입력 커넥터 | Cable |
| 입력 주파수 | 50 Hz, 60 Hz |
| 긴/배경 | 195.60 |
| 상세 설명 | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in metal boxIP65.Input range90-305Vca47-63Hz.Output in constant current350mA.Adjustable by external potentiometer (210-350mA).Range of output voltage with current mode constant128 to 257Vccaccording to demand load.Power:89,95 W.Efficiency typical:91,5%.Potentiometer:This model incorporates 1 external potentiometer that allows us to regulate the maximum output current.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,96to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+80ºC.Dimensions (Length x Width x Height):195,6 x 61,5 x 38,8 mm7 years of warranty.Manufacturer: MEAN WELLThis source can work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. In this version AB, the output current can be adjusted byexternal potentiometerlocated in the housing of the sourcein addition to having regulation 1-10V, 10V PWM, or resistance.The series HLG are LED drivers, class I grounded.With metal housing IP65. The series HLG has a high efficiency designed for applications of public lighting, architectural, exterior, interior or any lighting application LED needs a driver of high quality. Approved HL Class I Division 2 for ex-zones in the US. Suitable for LED lighting or LED displays. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| 출력 커넥터 | Cable |
| 입력 유형 CA | Single-phase |
| 보증 기간(년) | 7,00 |
| 원산지 | China |
| 출력 전류 mA | 200, 250, 300, 350 |
| 최소 출력 강도(mA) | 210,00 |
| 최대 출력 강도(mA) | 350,00 |
기술 사양 및 성능 데이터
설치 및 운영 가이드