재고 있음 인기 제품
HLP-40H-20
HLP-40H-20 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 20VDC / 2A, open frame, Dimming ..
$0.00USD
3004개 재고
주요 사양
이름:HLP-40H-20
상태:Recommended Model
체재:Open Format
시리즈:HLP-40H
공급업체 정보
MEANWELL
제품: 6448
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 이름 | HLP-40H-20 |
| 상태 | Recommended Model |
| 체재 | Open Format |
| 시리즈 | HLP-40H |
| 밝기 조절 | 1-10V, Resistance 0-100K, PWM Signal 10V |
| 승인 | CCC, CE, UL |
| 전력(와트) | 40,00 |
| 너비(mm) | 53.00 |
| 높이(mm) | 27.00 |
| AC 입력 최대 | 305,00 |
| AC 입력 최소 | 90,00 |
| 응용 프로그램 | Lighting |
| 제조업체 | MEAN WELL |
| 제품 유형 | LED Driver |
| 격리(V) | 3.750,00 |
| 최대 출력(와트) | Forty |
| 입력 커넥터 | Plug-in |
| 입력 주파수 | 50 Hz, 60 Hz |
| 긴/배경 | 147.00 |
| 상세 설명 | LED driver.Specially designed for powering LEDs directly in a steady stream.Open format typePCBS.Input range90-305Vca47-63Hz.Output in constant current2A.Adjustable by external potentiometer (1,2-2A).Range of output voltage with current mode constant12 to 20vdcaccording to demand load.The output voltage in voltage mode constant20vdc. Adjustable by external potentiometer (17-22Vcc).Power:40W.Efficiency typical:88%.Potentiometers:This model incorporates 2 external potentiometers that allows us to regulate the output voltage and the maximum output current.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,95to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+70ºC.Dimensions (Length x Width x Height):147 x 53 x 27mm.3 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. The output voltage and the output current can be adjusted byexternal potentiometerslocated in the plate of the source, in addition to having regulation 0-10V/1-10V, 10V PWM, or resistance.With format, open PCB type. The series HLP is intended for applications of LED lighting. Suitable for dry environments and interior. Burn test at 100% load.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| 출력 커넥터 | Plug-in |
| 입력 유형 CA | Single-phase |
| 보증 기간(년) | 3,00 |
| 원산지 | China |
| 출력 전류 mA | 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550, 1600, 1650, 1700, 1750, 1800, 1850, 1900, 1950, 2000 |
| 최소 출력 강도(mA) | 1.200,00 |
| 최대 출력 강도(mA) | 2.000,00 |
제품 설명
More details
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
기술 세부 정보
LED driver.
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
