서비스 시간: 월요일 ~ 금요일 9:00-18:00
IB IL 24 PSDO 8-PAC - IB IL 24 PSDO 8-PAC 2985631 PHOENIX CONTACT Safety-oriented digital output module, IP20 degree of protection..
재고 있음 인기 제품

IB IL 24 PSDO 8-PAC

IB IL 24 PSDO 8-PAC 2985631 PHOENIX CONTACT Safety-oriented digital output module, IP20 degree of protection..

$0.00USD
4928개 재고
주요 사양
:2, 3, 4-wire
깊이:71.5 mm
너비:48.8 mm
키:119.8 mm
공급업체 정보
제품: 0
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원

기술 사양

매개변수가치
2, 3, 4-wire
깊이71.5 mm
너비48.8 mm
119.8 mm
순중량245.6 g
지정Inline local bus
출력 이름Digital outputs
장착 유형DIN rail
출력 전류max. 6 A (Total current of all outputs, -25 °C ... 50 °C)
출력 전압24 V DC (US- 1 V)
공급 전압24 V DC (via voltage jumper)
필드버스 시스템INTERBUS
연결 방식Inline data jumper
출력 개수4 (with two-channel assignment)
정격 부하, 램프see safety data
치수에 대한 참고 사항Housing dimensions
보호 회로Overload protection, short-circuit protection of outputs
변속 속도500 kBit/ / 2 MBit/s (can be switched)
현재 소비량max. 230 mA (from the local bus)
정격 부하, 저항see safety data
보호 수준IP20
진단 메시지Short-circuit / overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor
공급 전압 범위19.2 V DC ... 30 V DC
주 회로 전원 공급 장치 UM24 V DC
공칭 출력 전압24 V DC
UL의 통신 역량7.5 V (via voltage jumper)
정격 부하, 유도성see safety data
공급 전압 범위 UM19.2 V DC ... 30 V DC (including all tolerances, including ripple)
공기압(작동)80 kPa ... 108 kPa (up to 2000 m above sea level)
UL에서 제공하는 전류 소비량max. 230 mA (see safety data)
UM의 현재 소비량typ. 30 mA (all outputs set including actuator current)
중량 사양에 대한 참고 사항with connectors
주변 온도(작동)-25 °C ... 55 °C
공기압(보관/운송)66 kPa ... 108 kPa (up to 3500 m above mean sea level)
EN 13849-1에 따른 분류4
그룹당 최대 출력 전류3 A
허용 습도(작동 조건)10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.)
모듈당 최대 출력 전류3 A (See technical data)
채널당 최대 출력 전류2 A
주변 온도(보관/운송)-25 °C ... 70 °C
허용 습도 (보관/운송)10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.)

제품 설명

Safety-oriented, IP20-rated digital output module for SafetyBridge, INTERBUS-Safety and PROFIsafe systems. The module has 4 secure digital outputs with two-channel occupancy or 8 secure digital output
주요 기능
  • 산업 등급 품질
  • RoHS 준수
  • CE 인증
  • 1년 보증

기술 세부 정보

The safety module is an output module from the Inline product range, designed for use in an INTERBUS-Safety or PROFIsafe system. The safety module can be used as part of an Inline station at any point within an INTERBUS-Safety or PROFIsafe Inline system. The transmission speed of the safety module can be set to 500 kbaud or 2 Mbaud using a switch. Only one transmission speed must be used uniformly within a station. The module has four safe digital outputs for two-channel assignment or eight safe digital outputs for single-channel assignment. The outputs can be parameterized according to the application and enable the integration of actuators in the safe INTERBUS system (INTERBUS-Safety) and in the PROFIsafe system. Depending on the installation and parameterization, in these systems the safety module can achieve the following safety integrity:

제품 문서

데이터시트

기술 사양 및 성능 데이터

사용자 매뉴얼

설치 및 운영 가이드

Top