서비스 시간: 월요일 ~ 금요일 9:00-18:00
IDLC-45A-500 - IDLC-45A-500 MEANWELL AC-DC Constant Current LED Driver (CC) with PFC, Output 90VDC / 0.5A, 2 in 1 dimming w..
재고 있음 인기 제품

IDLC-45A-500

IDLC-45A-500 MEANWELL AC-DC Constant Current LED Driver (CC) with PFC, Output 90VDC / 0.5A, 2 in 1 dimming w..

$0.00USD
3278개 재고
주요 사양
이름 (상세 정보):IDLC-45A-500
상태 (세부 정보):New
형식 (세부 정보):Box
시리즈 (상세 정보):IDLC-45A
공급업체 정보
MEANWELL
MEANWELL
제품: 6448
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원

기술 사양

매개변수가치
이름 (상세 정보)IDLC-45A-500
상태 (세부 정보)New
형식 (세부 정보)Box
시리즈 (상세 정보)IDLC-45A
승인 내역 (상세 정보)CCC, CE, ENEC, UL
전력(와트) (상세 정보)45,00
규정 (세부 사항)0-10V, 1-10V, PWM Signal 10V
세부정보 (Subformato)IP20
너비(mm) (상세 정보)75.00
높이(mm) (상세 정보)25.00
AC 입력 최대값 (상세 정보)295,00
AC 입력 최소값 (상세 정보)90,00
지원서 (상세 정보)Lighting
제조업체 (상세 정보)MEAN WELL
제품 유형 (상세 정보)LED Driver
격리(V) (세부 사항)3.750,00
최대 출력(와트) (상세 정보)Forty five
입력 커넥터(세부 정보)Quick Connector
입력 주파수 (상세 정보)50 Hz, 60 Hz
장문/배경 (세부 정보)120.00
상세 설명 (세부 정보)LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range90-295Vca47-63Hz.Output in constant current500mA.Range of output voltage with current mode constant54 to 90Vccaccording to the number d eLEDs in series.Power:45W.Efficiency typical:85%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0.92to 230vac at full load.OutputAuxiliary 12V/50mA.Consumption without load <1,2 W.Operating temperature range of caseTcfrom-20ºCup+85ºC.Dimensions (Length x Width x Height):120 x 75 x 25mm.3 years of warranty.Manufacturer: MEAN WELL.The series IDLC are LED drivers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. The A version has an outputauxiliaryof12V/50mA.With plastic housing designed for lighting applications in interior.Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series IDLV or PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.
출력 커넥터(세부 정보)Quick Connector
입력 유형 CA (세부 정보)Single-phase
보증 기간(년) (상세 정보)3,00
원산지 (상세 정보)China
출력 전류(mA) (상세 정보)Five hundred
최소 출력 강도(mA) (상세 정보)500,00
최대 출력 강도(mA) (상세 정보)500,00

제품 설명

More details
주요 기능
  • 산업 등급 품질
  • RoHS 준수
  • CE 인증
  • 1년 보증

기술 세부 정보

LED driver dimmable.

제품 문서

데이터시트

기술 사양 및 성능 데이터

사용자 매뉴얼

설치 및 운영 가이드

Top