

| 매개변수 | 가치 |
|---|---|
| • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. | |
| 유형 | Straight, plastic molded |
| 전압 | 48 V AC |
| 차폐된 | yes |
| 케이블 타입 | SSLC11Y |
| 위치 수 | 17 |
| 안전 주의사항 | • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. |
| 나사 유형 | M17 |
| 케이블 길이 | 5 m |
| 최대 전류 | 3.6 A |
| 제품 유형 | Signal and power cable |
| 테스트 전압 | 0.5 kV |
| 정격 전류 | 9 A |
| 케이블 구조 | 3 x 2 x 0.14 mm² + 2 x 0.5 mm² + 4 x 0.14 mm² + 4 x 0.22 mm² |
| 잠금 방식 | Screw locking mechanism |
| 기사 수정 | 13 |
| 주택 자재 | Zinc die-cast |
| 접촉 저항 | < 0.3 mΩ |
| 공칭 전류 IN | 3.6 A |
| 오염 정도 | 3 |
| 정격 서지 전압 | 1.5 kV |
| 보호 수준 | IP67, when in locked state |
| 과전압 범주 | III |
| 케이블 구조(AWG) | 26 AWG/3pr + 20 AWG/2c + 26 AWG/4c + 24 AWG/4c |
| 회전 방향 | Standard |
| 접점 스위칭 방식 | Socket |
| 외부 덮개, 색상 | green |
| 공칭 전압, 케이블 | 30 V |
| 외부 덮개, 재질 | TPU |
| 외부 케이블 직경 | 9.40 mm |
| 재질 전선 절연 | TPU |
| 삽입/제거 주기 | 50 |
| 주변 온도(작동) | -40 °C ... 105 °C |
| 최소 굽힘 반경, 고정 설치 | 38 mm |
| 최소 굽힘 반경, 이동식 설치 | 94 mm |
| 고정 설치 시 주변 온도(작동 조건) | -30 °C ... 80 °C |
| 유연한 설치를 위한 주변 온도(작동) | -30 °C ... 60 °C |
기술 사양 및 성능 데이터
설치 및 운영 가이드