

| 매개변수 | 가치 |
|---|---|
| RS-422 | |
| EMC | B |
| MTBF | 10 Years (Telcordia standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) |
| MTTF | 1654 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| 메모 | Please follow the special installation instructions in the documentation! |
| 깊이 | 114.5 mm |
| 입력 | ± 2.2 kV (Test Level 3) |
| 너비 | 22.5 mm |
| 키 | 99 mm |
| 신호 | Modbus |
| 전압 | 10 V |
| 고도 | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| 댓글 | Criterion B |
| EMC 참고 사항 | EMC: class A product, see manufacturer's declaration in the download area |
| 습기 | A |
| 비트 지연 | ≤ 2.5 µs |
| 울로 둘러싼 땅 | Required protection according to the Rules shall be provided upon installation on board |
| 인터페이스 | RS-232/-485 |
| 진동 | A |
| CCCex 노트 | Use in potentially explosive areas is not permitted in China. |
| 애플리케이션 | RS-232 |
| 자격증 | CE-compliant |
| 기준 A | Normal operating behavior within the specified limits. |
| 기준 B | Temporary impairment to operational behavior that is corrected by the device itself. |
| 온도 | B |
| 제품 유형 | Interface converter |
| 장착 유형 | DIN rail mounting |
| 비트 왜곡 | ≤ 5 % |
| 신분증 | II 3 G Ex nA IIC T4 Gc |
| 소음 방출 | EN 61000-6-4 |
| 잡음 내성 | EN 61000-6-2:2005 |
| 핀 할당 | DTE/DCE switchover via switch |
| 색상(하우징) | green (RAL 6021) |
| 전자기장 세기 | 10 V/m |
| 주파수 범위 | 26 MHz ... 3 GHz (Test Level 3) |
| 기사 수정 | 22 |
| 공기 중으로 배출 | ± 8 kV (Test Level 3) |
| 오염도 | 2 |
| 연결 방식 | D-SUB 9 plug |
| 접촉 방전 | ± 6 kV (Test Level 3) |
| 조임 토크 | 0.56 Nm ... 0.79 Nm |
| 자재(주택) | PA 6.6-FR |
| 치수 도면 | |
| 지원서 작성 시 유의사항 | Only for industrial use |
| 지원되는 프로토콜 | transparent protocol |
| 전송 길이 | 15 m (shielded twisted pair) |
| 보호 수준 | IP20 |
| 전기적 절연 | VCC // V.24 (RS-232) // RS-485 |
| 공급 전압 범위 | 18 V AC/DC ... 30 V AC/DC (via pluggable COMBICON screw terminal block) |
| 종단 저항 | 390 Ω |
| 표준/규정 | EN 61000-4-2 |
| 전송 채널 | 2 (1/1), RxD, TxD, full duplex |
| 정격 공급 전압 | 24 V AC/DC |
| 데이터 방향 전환 | Automatic control or via RTS/CTS |
| 최대 전류 소모량 | 100 mA |
| 직렬 전송 속도 | 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 31.25; 38.4; 57.6; 75; 93.75; 115.2 kbps |
| 일반적인 전류 소모량 | 85 mA (24 V DC) |
| 테스트 전압 데이터 인터페이스 | 1.5 kV AC |
| 전자기 호환성 | Conformance with EMC Directive 2014/30/EU |
| 주변 온도(작동) | -40 °C ... 70 °C |
| 허용 습도(작동 조건) | 10 % ... 95 % (non-condensing) |
| 단선/단자점, 유연함 | 0.2 mm² ... 2.5 mm² |
| 단일 도체/단자점, 견고한 구조 | 0.2 mm² ... 2.5 mm² |
| 주변 온도(보관/운송) | -40 °C ... 85 °C |
| 도체 단면적, 연질 [AWG] | 24 ... 12 |
| 테스트 전압 데이터 인터페이스/전원 공급 | 1.5 kV AC |
| 최대 AWG 도체 단면적, 연질 | 12 |
| 최소 AWG 도체 단면적, 연선 | 24 |
| 정상 작동 조건에서의 최대 전력 소모 | 2.04 W |
기술 사양 및 성능 데이터
설치 및 운영 가이드