

| 매개변수 | 가치 |
|---|---|
| 120 V DC | |
| 주도의 | no |
| 너비 | 54 mm |
| 코딩 | A |
| 키 | 42 mm |
| 길이 | 123 mm |
| 일반적인 | When connecting the signal lines to the black PCB terminal blocks, please use a 0.4 x 2.0 mm screwdriver.The black PCB terminal blocks only require a minimal amount of operating force.Screwdriver: SZS 0,4X2,0 - 1205202Using larger screwdrivers or excessive force may damage the PCB terminal blocks.When using ferrules, the wires can be inserted straight into the PCB terminal blocks without opening the clamping area. |
| 애플리케이션 | Standard |
| 제품 유형 | Distributor box |
| 조립 참고 사항 | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| 슬롯 수 | 6 |
| 접촉 재료 | Cu alloy |
| 자재 하우징 | PBT |
| 연결 방식 | Spring-cage connection |
| 공칭 전압 UN | 120 V AC |
| 치수 도면 | |
| 지원서 작성 시 유의사항 | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| 직위 수 | 4 |
| 보호 수준 | IP65 |
| 정격 전류, 총 | 12 A |
| 씰 재질 O링 | NBR |
| 표준 명칭 | M12 connector |
| 상태 표시가 있습니다 | No |
| 외부 케이블 직경 | 7 mm ... 12 mm |
| 접촉 캐리어 재료 | PA |
| 접촉면 재질 | gold-plated |
| 재질 나사형 슬리브 | PBT |
| 표준/사양 | IEC 61076-2-101 |
| 재질: 성형 화합물 | PUR |
| 신호선의 길이 스트리핑 | 6 mm |
| 조임 토크, 유니온 너트 | 2.5 Nm |
| 피복 벗기기 길이 전원 공급 장치 | 10 mm |
| 피복의 벗겨내는 길이 | 50 mm (Master cable) |
| 조임 토크, 커버 스크류 | 1 Nm |
| 주변 온도(작동) | -25 °C ... 80 °C |
| 센서/액추에이터 연결 시스템 | M12-SPEEDCON-socket |
| 슬롯당 현재 허용 용량 | 4 A |
| UL 94에 따른 난연성 등급 | V0 |
| 경로당 최대 전류 허용 용량 | 2 A |
| 슬롯/위치 = 전선 색상 또는 연결 방식 | 1 / 4 (A) = WH |
| 도체 단면적 유연 신호선 | 0.2 mm² ... 0.5 mm² |
| 조임 토크 슬롯 센서/액추에이터 케이블 | 0.4 Nm |
| 도체 단면적 유연 전원 공급 장치 | 0.2 mm² ... 1.5 mm² |
| 연결 단면적 AWG 유연 신호선 | 24 ... 20 |
| 연결 단면적 AWG 유연 전원 공급 장치 | 24 ... 16 |
| 하우징 고정용 장착 나사의 조임 토크 | 0.5 Nm |
기술 사양 및 성능 데이터
설치 및 운영 가이드