

| 매개변수 | 가치 |
|---|---|
| IP67, when in locked state | |
| 메모 | In line with |
| 재료 | Zinc die-cast (nickel-plated) |
| 헤드 디자인 | Pin |
| 나사 유형 | M12 |
| 제품 유형 | Panel mounting base |
| 조립 참고 사항 | Spacing between the top edge of the PCB and the back of the front plate: 7 mm |
| 장착 유형 | Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 7 mm |
| 밀봉재 | FKM |
| 기사 수정 | 04 |
| 헤드 나사형 | M12 |
| 연결 방식 | THR solder connection |
| 헤드 잠금형 | SPEEDCON |
| 조임 토크 | 1.5 ... 2 Nm |
| 작동 시 주의 사항 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 주문 정보: | Lock nut is included in the scope of delivery |
| 보호 수준 | IP67 (correctly plugged in and locked) |
| 표준 명칭 | M12 connector |
| 표준/사양 | IEC 61076-2-101 |
| 삽입/제거 주기 | > 100 |
| 주변 온도(작동) | -25 °C ... 85 °C (Plug / socket) |
| (전원 연결 시) 보호 등급 | IP67 (correctly plugged in and locked) |
기술 사양 및 성능 데이터
설치 및 운영 가이드