

| 매개변수 | 가치 |
|---|---|
| • WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them. | |
| 차폐된 | No |
| 케이블 타입 | TPE braided yarn |
| 플러그 사이클 | > 100 |
| 센서 유형 | Universal |
| 케이블 길이 | 0.5 m |
| 법전 편찬 | to |
| 선 단면 | 0.34 mm² |
| 제품 유형 | Circular connectors (equipment side) |
| 안전 주의사항 | WARNING: Connectors should not be plugged in or unplugged under load. Failure to comply and improper use can result in property damage and personal injury. |
| 급증 카테고리 | Ii |
| AWG 신호선 | 22 |
| 연결 유형 | Single braided threads |
| 가스켓 재질 | FKM |
| 라인 저항 | ≤ 57.6 mΩ/m |
| 전봇대 개수 | 5 |
| 접촉 재료 | CuZn |
| 보호 지수 | IP67 (In plugged in state) |
| 규칙/조항 | IEC 61076-2-101 |
| 장착 방식 | Rear wall mount |
| 조임 토크 | 3 Nm ... 4 Nm (on the mounting side) |
| 접촉 저항 | ≤ 3 mΩ |
| 헤더 스레드 유형 | M12 |
| 명목 전류 IN | 4 A |
| 공칭 전압 UN | 60 V |
| 테스트 전압 케이블 | 2000 V AC |
| 전도성 물질 | Tinned Cu Conductor |
| 오염 정도 | 3 |
| 헤더 건설 | Male connector |
| 신호 유형/범주 | Universal |
| 싱글 드라이버, 컬러 | black, brown, blue, white, gray |
| 절연 저항 | ≥ 100 MΩ |
| 정격 전압 케이블 | 300 V |
| 케이블 콘센트 개수 | 1 |
| 연락처 지원 자료 | AP 6.6 |
| 표준의 명칭 | M12 connector |
| 설치 지침 | with flat nut |
| 재질: 접촉면 | Au |
| 최대 도체 저항 | 57.6 mΩ/m |
| 나사 연결 재질 | Zinc die-cast iron, nickel-plated |
| 벽 두께 단열재 | 0.21 mm (Conductor Insulation) |
| 선로 절연 저항 | ≥ 20 MΩ*km |
| 주변 온도(서비스) | -40 °C ... 85°C (cable, fixed arrangement) |
| 과도 전압의 크기 결정 | 1.5 kV |
| 재질: 도체 절연체 | TPE |
| 도체 구조 신호 케이블 | 7x 0.25 mm |
| 절연체를 포함한 도체 직경 | 1.2 mm ±0.07 mm |
| 운영에 관한 관찰 사항 | The electrical and mechanical values listed require a pair of plug-in connectors that are properly assembled and locked. If the plug-in connector is unlocked and there is a danger of contamination, the plug-in connector must be closed with a cap > IP54. In addition, influences by conductors, lines, or assembly of printed circuit boards must be considered. |
| UL 94에 따른 난연성 등급 | V0 |
기술 사양 및 성능 데이터
설치 및 운영 가이드