

| 매개변수 | 가치 |
|---|---|
| 1.5 kV AC/DC | |
| 메모 | In line with |
| 코딩 | T |
| 차폐된 | no |
| 케이블 타입 | UL/cUL stranded hook-up wire |
| 헤드 디자인 | Pin |
| 센서 유형 | Power |
| 나사 유형 | M12 |
| 케이블 길이 | 1 m |
| 할로겐 프리 | yes |
| 제품 유형 | Circular connectors (device side) |
| 테스트 전압 | 1.5 kV |
| 조립 참고 사항 | With flat nut |
| 장착 유형 | Rear mounting |
| 밀봉재 | FKM |
| AWG 신호선 | 16 |
| 기사 수정 | 05 |
| 접촉 재료 | CuZn |
| 난연성 | in acc. to UL 1581 VW1 |
| 헤드 나사형 | M12 |
| 연결 방식 | Individual wires |
| 조임 토크 | M12 connector |
| 도체 재료 | Bare Cu litz wires |
| 접촉 저항 | ≤ 3 mΩ |
| 공칭 전류 IN | 12 A |
| 공칭 전압 UN | 63 V |
| 작동 시 주의 사항 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 주문 정보: | Lock nut is included in the scope of delivery |
| 단선, 컬러 | black, brown, blue, white |
| 케이블 단면적 | 1.31 mm² |
| 오염 정도 | 3 |
| 직위 수 | 4 |
| 정격 서지 전압 | 1.5 kV |
| 보호 수준 | IP67 |
| 케이블 콘센트 개수 | 1 |
| 과전압 범주 | III |
| 신호 유형/범주 | Power |
| 표준 명칭 | M12 connector |
| 절연 저항 | ≥ 100 MΩ |
| 도체 단면적 | 1.31 mm² |
| 접점 연결 유형 | Pin |
| 접촉 캐리어 재료 | PA |
| 접촉면 재질 | Au |
| 재질 전선 절연 | mPPE |
| 표준/사양 | IEC 61076-2-111 |
| 삽입/제거 주기 | > 100 |
| 나사 연결용 재료 | CuZn alloy, nickel-plated |
| 절연체를 포함한 전선 직경 | 2 mm |
| 주변 온도(작동) | -40 °C ... 105 °C (cable, fixed installation) |
| UL 94에 따른 난연성 등급 | V0 |
기술 사양 및 성능 데이터
설치 및 운영 가이드