

| 매개변수 | 가치 |
|---|---|
| 6 mm | |
| 코딩 | D |
| 일반적인 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 차폐된 | yes |
| 애플리케이션 | Data |
| 헤드 디자인 | Pin |
| 센서 유형 | Ethernet |
| 나사 유형 | M12 |
| 제품 유형 | Circular connectors (device side) |
| 장착 유형 | Rear mounting M16 x 1.5 With flat nut |
| 밀봉재 | NBR |
| 접촉 재료 | CuZn |
| 헤드 나사형 | M12 |
| 연결 방식 | Wave soldering |
| 헤드 케이블 출력부 | straight |
| 헤드 잠금형 | SPEEDCON |
| 조임 토크 | 3 Nm |
| 접촉 저항 | ≤ 3 mΩ |
| 공칭 전류 IN | 4 A |
| 공칭 전압 UN | 48 V AC |
| 오염 정도 | 3 |
| 치수 도면 | |
| 직위 수 | 4 |
| 정격 서지 전압 | 2.5 kV |
| 보호 수준 | IP67 (When plugged in) |
| 과전압 범주 | II |
| 신호 유형/범주 | Ethernet CAT5, 100 Mbps |
| 표준 명칭 | M12 connector |
| 조립 설명서 | With flat nut |
| 절연 저항 | ≥ 100 MΩ |
| 접점 연결 유형 | Pin |
| 접촉 캐리어 재료 | PA 6.6 |
| 접촉면 재질 | Ni/Au |
| 솔더 핀의 길이 | 6 mm |
| 표준/사양 | IEC 61076-2-101 |
| 삽입/제거 주기 | ≥ 100 |
| 나사 연결용 재료 | Zinc die-cast, nickel-plated |
| 절연체를 포함한 전선 직경 | 1 mm |
| 주변 온도(작동) | -40 °C ... 70 °C (Plug / socket) |
| UL 94에 따른 난연성 등급 | V0 |
| 전송 특성(범주) | CAT5 (IEC 11801:2002) |
기술 사양 및 성능 데이터
설치 및 운영 가이드