

| 매개변수 | 가치 |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| 코딩 | A |
| 차폐된 | no |
| 케이블 타입 | TPE litz wire |
| 헤드 디자인 | Pin |
| 안전 주의사항 | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| 케이블 길이 | 0.15 m |
| 제품 유형 | Circular connectors (device side) |
| 장착 유형 | Front wall/screw mounting |
| AWG 신호선 | 22 |
| 기사 수정 | 07 |
| 케이블 저항 | ≤ 57.6 mΩ/m |
| 접촉 재료 | CuZn |
| 헤드 나사형 | M12 |
| 연결 방식 | Individual wires |
| 조임 토크 | 3 Nm ... 4 Nm (Installation-side) |
| 도체 재료 | Tin-plated Cu litz wires |
| 접촉 저항 | ≤ 3 mΩ |
| 공칭 전류 IN | 4 A |
| 공칭 전압 UN | 250 V |
| 작동 시 주의 사항 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 단선, 컬러 | brown, white, blue, black |
| 케이블 단면적 | 0.34 mm² |
| 오염 정도 | 3 |
| 직위 수 | 4 |
| 정격 서지 전압 | 2.5 kV AC |
| 테스트 전압, 케이블 | 2000 V AC |
| 보호 수준 | IP65/IP67/IP69/IP69K |
| 케이블 콘센트 개수 | 1 |
| 과전압 범주 | II |
| 표준 명칭 | M12 connector |
| 절연 저항 | ≥ 100 MΩ |
| 두께, 절연 | 0.21 mm |
| 공칭 전압, 케이블 | 300 V |
| 도체 단면적 | 0.34 mm² |
| 접점 연결 유형 | Pin |
| 접촉 캐리어 재료 | PA 6.6 |
| 접촉면 재질 | Au |
| 재질 전선 절연 | TPE |
| 표준/사양 | according to IEC 61076-2-101 |
| 최대 도체 저항 | 57.6 mΩ/m |
| 케이블 절연 저항 | ≥ 20 MΩ*km |
| 삽입/제거 주기 | > 100 |
| 나사 연결용 재료 | Stainless steel |
| 절연체를 포함한 전선 직경 | 1.2 mm ±0.07 mm |
| 주변 온도(작동) | -40 °C ... 85 °C (cable, fixed installation) |
| 도체 구조 신호선 | 7x 0.25 mm |
| UL 94에 따른 난연성 등급 | V0 |
기술 사양 및 성능 데이터
설치 및 운영 가이드