

| 매개변수 | 가치 |
|---|---|
| 0.25 mm² ... 0.5 mm² (solid) | |
| 코딩 | D |
| 일반적인 | This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) |
| 차폐된 | yes |
| 애플리케이션 | Data |
| 헤드 디자인 | Socket |
| 센서 유형 | PROFINET |
| 케이블 콘센트 | angled |
| 제품 유형 | Circular connector (cable-side) |
| 조립 참고 사항 | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| 밀봉재 | Neoprene |
| 접촉 재료 | CuSn |
| 헤드 나사형 | M12 |
| 외경 | 4 mm ... 8 mm |
| 연결 방식 | Insulation displacement connection |
| 헤드 케이블 출력부 | angled |
| 조임 토크 | 0.4 Nm (M12 knurl) |
| 접촉 저항 | ≤ 5 mΩ |
| 공칭 전류 IN | 1.75 A |
| 공칭 전압 UN | 48 V AC |
| 오염 정도 | 3 |
| 직위 수 | 4 |
| 보호 수준 | IP67 |
| 케이블 콘센트 개수 | 1 |
| 과전압 범주 | II |
| 신호 유형/범주 | PROFINET CAT5 (based on IEC 11801), 100 Mbps |
| 표준 명칭 | M12 connector |
| 절연 저항 | ≥ 100 MΩ |
| 그립 본체의 재질 | Zinc die-cast, nickel-plated |
| 연결 단면 | 0.25 mm² ... 0.5 mm² (flexible) |
| 접촉 캐리어 재료 | PA 6 |
| 접촉면 재질 | Ni/Au |
| 표준/사양 | according to IEC 61076-2-101 |
| 삽입/제거 주기 | ≥ 100 |
| 연결 단면 AWG | 24 ... 20 (flexible) |
| 나사 연결용 재료 | Brass, nickel-plated |
| 주변 온도(작동) | -40 °C ... 85 °C (Plug / socket) |
| UL 94에 따른 난연성 등급 | V0 |
기술 사양 및 성능 데이터
설치 및 운영 가이드