

| 매개변수 | 가치 |
|---|---|
| 4 Nm (Pressure nut with coupling sleeve) | |
| 코딩 | X |
| 길이 | 43 mm |
| 일반적인 | This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) |
| 차폐된 | yes |
| 애플리케이션 | Data |
| 헤드 디자인 | Plug |
| 센서 유형 | Ethernet |
| 케이블 콘센트 | straight |
| 제품 유형 | Circular connector (cable-side) |
| 조립 참고 사항 | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| 밀봉재 | FKM |
| 기사 수정 | 05 |
| 직경 하우징 | 16 mm |
| 헤드 나사형 | M12 |
| 외경 | 6.5 mm ... 10 mm |
| 연결 방식 | Crimp connection |
| 헤드 케이블 출력부 | straight |
| 조임 토크 | 0.4 Nm (M12 knurl) |
| 공칭 전류 IN | 0.5 A |
| 공칭 전압 UN | 48 V AC |
| 오염 정도 | 3 |
| 치수 도면 | |
| 직위 수 | 8 |
| 정격 서지 전압 | 0.8 kV |
| 보호 수준 | IP65 |
| 케이블 콘센트 개수 | 1 |
| 과전압 범주 | II |
| 신호 유형/범주 | Ethernet CAT6A(IEC 11801), 10 Gbps |
| 표준 명칭 | M12 connector |
| 절연 저항 | ≥ 100 MΩ |
| 그립 본체의 재질 | Zinc die-cast, nickel-plated |
| 표준/규정 | PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| 렌치 크기, 유니온 너트 | 15 mm |
| 연결 단면 | 0.14 mm² ... 0.34 mm² (flexible) |
| 접촉 캐리어 재료 | PA 6.6 |
| 표준/사양 | IEC 61076-2-109 |
| 렌치 크기, 카운터 너트 | 14 mm |
| 삽입/제거 주기 | ≥ 100 |
| 연결 단면 AWG | 26 ... 22 (flexible) |
| 나사 연결용 재료 | Zinc die-cast, tin-plated |
| 주변 온도(조립) | -5 °C ... 50 °C |
| 주변 온도(작동) | -40 °C ... 85 °C (Plug / socket) |
| UL 94에 따른 난연성 등급 | V0 |
| 개별 전선의 피복 벗기기 길이 | 4 mm +0,5 mm |
| 접점 색상(신호 지정) 접점(선택 사항) | 1 = WHOG (D1+) |
기술 사양 및 성능 데이터
설치 및 운영 가이드