

| 매개변수 | 가치 |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| 코딩 | A |
| 차폐된 | no |
| 헤드 디자인 | Pin |
| 안전 주의사항 | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| 나사 유형 | M12 |
| 봉인 있음 | no |
| 조립 참고 사항 | 25 mm side length |
| 장착 유형 | Front mounting Square flange 25 mm side length |
| 상태 표시 | no |
| 기사 수정 | 02 |
| 헤드 나사형 | M12 |
| 연결 방식 | Crimp connection |
| 헤드 케이블 출력부 | straight |
| 접촉 저항 | ≤ 3 mΩ |
| 공칭 전류 IN | 4 A |
| 공칭 전압 UN | 60 V |
| 작동 시 주의 사항 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 케이블 단면적 | 0.34 mm² |
| 오염 정도 | 3 |
| 직위 수 | 5 |
| 정격 서지 전압 | 1.5 kV |
| 보호 수준 | IP67 |
| 케이블 콘센트 개수 | 1 |
| 과전압 범주 | II |
| 표준 명칭 | M12 connector |
| 절연 저항 | ≥ 100 MΩ |
| 상태 표시가 있습니다 | No |
| 접촉 캐리어 재료 | PA 6.6 |
| 표준/사양 | IEC 61076-2-101 |
| 삽입/제거 주기 | > 100 |
| 주변 온도(작동) | -40 °C ... 85 °C (cable, fixed installation) |
| UL 94에 따른 난연성 등급 | V0 |
기술 사양 및 성능 데이터
설치 및 운영 가이드