

| 매개변수 | 가치 |
|---|---|
| -40 °C ... 85 °C (without mechanical actuation) | |
| 메모 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 코딩 | A - standard |
| 토크 | 3 Nm ... 4 Nm (Installation-side) |
| 케이블 타입 | TPE litz wire |
| 전선 색상 | brown, white, blue, black |
| 장착 유형 | Front mounting Square flange |
| 정격 전압 | 250 V |
| 상태 표시 | No |
| AWG 신호선 | 22 |
| 케이블 길이 | 0.5 m |
| 접촉 재료 | CuZn |
| 소재, 널링 | Zinc die-cast, nickel-plated |
| 오염도 | 3 |
| 밀봉재 | FKM |
| 연결 방식 | Individual wires |
| 도체 재료 | Tin-plated Cu litz wires |
| 직위 수 | 4 |
| 정격 서지 전압 | 2.5 kV |
| 테스트 전압, 케이블 | 2000 V AC |
| 도체 저항 | ≤ 57.6 mΩ/m |
| 보호 수준 | IP67 |
| 과전압 범주 | II |
| 절연 저항 | ≥ 100 MΩ |
| 그립 본체의 재질 | Zinc die-cast, nickel-plated |
| 표준/규정 | M12 connector IEC 61076-2-101 |
| 두께, 절연 | 0.21 mm (Core insulation) |
| 공칭 전압, 케이블 | 300 V |
| 40°C에서의 정격 전류 | 4 A |
| 도체 단면적 | 0.34 mm² |
| 접촉 캐리어 재료 | PA 66 |
| 접촉면 재질 | Ni/Au |
| 삽입/제거 주기 | > 100 |
| 재료 도체 절연 | TPE |
| 주변 온도(작동) | -25 °C ... 85 °C (Plug / socket) |
| 도체 구조 신호선 | 7x 0.25 mm |
| 절연체를 포함한 코어 직경 | 1.2 mm ±0.07 mm |
| UL 94에 따른 난연성 등급 | V0 |
기술 사양 및 성능 데이터
설치 및 운영 가이드