

| 매개변수 | 가치 |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| 코딩 | B |
| 차폐된 | yes |
| 케이블 타입 | INTERBUS [900] |
| 애플리케이션 | Data |
| 헤드 디자인 | Pin |
| 안전 주의사항 | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| 센서 유형 | INTERBUS |
| 나사 유형 | M12 |
| 케이블 길이 | 0.5 m |
| 케이블 무게 | 70 kg/km |
| 제품 유형 | Circular connectors (device side) |
| 신호 속도 | 0.66 c |
| 테스트 전압 | 2500 V |
| 조립 참고 사항 | With flat nut |
| 장착 유형 | Rear mounting M16 x 1.5 With flat nut |
| 전체적인 반전 | 3 pairs to the core |
| 밀봉재 | FKM |
| 꼬인 쌍 | 2 cores to the pair |
| 케이블 용량 | ≤ 60 nF/km (At 800 Hz) |
| 파동 임피던스 | 120 Ω ±20 % (at 64 kHz) |
| AWG 신호선 | 24 |
| 루프 저항 | ≤ 159.80 Ω/km |
| 기사 수정 | 11 |
| 접촉 재료 | CuZn |
| 난연성 | according to VDE 0472, Part 4, test type B |
| 헤드 나사형 | M12 |
| 연결 방식 | Cable connection |
| 헤드 케이블 출력부 | straight |
| 헤드 잠금형 | SPEEDCON |
| 조임 토크 | 2 Nm ... 3 Nm (Installation-side) |
| 도체 재료 | Bare Cu litz wires |
| 접촉 저항 | ≤ 3 mΩ |
| 공칭 전류 IN | 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) |
| 공칭 전압 UN | 48 V AC |
| 작동 시 주의 사항 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 주문 정보: | Lock nut is included in the scope of delivery |
| 차폐 감쇠 | ≤ 15 dB/km (at 256 kHz) |
| 단선, 컬러 | green-yellow, white-brown, gray-pink |
| 도체 구조 | 3 x 2 x 0.22 mm² |
| 결합 저항 | < 250.00 mΩ/m (at 30 MHz) |
| 오염 정도 | 3 |
| 치수 도면 | |
| 직위 수 | 5 |
| 정격 서지 전압 | 1.5 kV |
| 전송 매체 | Copper |
| 보호 수준 | IP67 (When plugged in) |
| 케이블 콘센트 개수 | 1 |
| 과전압 범주 | II |
| 표준 명칭 | M12 connector |
| 절연 저항 | ≥ 100 MΩ |
| 외부 덮개, 색상 | may green RAL 6017 |
| 공칭 전압, 케이블 | 250 V (Peak value, not for high-power applications) |
| 외부 덮개, 재질 | PUR |
| 테스트 전압 코어/코어 | 1500 Vrms |
| 도체 단면적 | 3x 2x 0.22 mm² |
| 접점 연결 유형 | Pin |
| 외부 케이블 직경 | 8.00 mm |
| 접촉 캐리어 재료 | PA 6.6 |
| 접촉면 재질 | Ni/Au |
| 재질 전선 절연 | PE |
| 표준/사양 | IEC 61076-2-101 |
| 시험 전압 코어/쉴드 | 1000.00 Vrms |
| 삽입/제거 주기 | > 100 |
| 나사 연결용 재료 | Brass, nickel-plated |
| 주변 온도(작동) | -40 °C ... 80 °C (cable, fixed installation) |
| 도체 구조 신호선 | 32x 0.10 mm |
| 동적 하중 용량(굽힘) | Max. bending cycles: 5000000, Bending radius: 120 mm, Traversing path: 10 m, Traversing rate: 1.6 m/s, Acceleration: 3.2 m/s² |
| 근단 누화 감쇠(NEXT) | ≥ 61 dB (at 772 kHz) |
| UL 94에 따른 난연성 등급 | V0 |
| 최소 굽힘 반경, 고정 설치 | 60 mm |
| 최소 굽힘 반경, 유연한 설치 | 15 x D |
| 최소 굽힘 반경, 이동식 설치 | 120 mm |
기술 사양 및 성능 데이터
설치 및 운영 가이드