

| 매개변수 | 가치 |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| 코딩 | A |
| 차폐된 | yes |
| 케이블 타입 | PUR halogen-free black [PUR] |
| 헤드 디자인 | Pin |
| 안전 주의사항 | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| 센서 유형 | Universal |
| 나사 유형 | M12 |
| 케이블 길이 | 2 m |
| 케이블 무게 | 36 kg/km |
| 할로겐 프리 | in accordance with DIN VDE 0472 part 815 |
| 제품 유형 | Circular connectors (device side) |
| 테스트 전압 | ≥ 3000 V |
| UL AWM 스타일 | 20549 / 10493 (80°C/300 V) |
| 조립 참고 사항 | With flat nut |
| 장착 유형 | Rear mounting M16 x 1.5 With flat nut |
| 전체적인 반전 | 4 wires, twisted |
| 밀봉재 | FKM |
| 케이블 용량 | ≤ 80 pF/m (Conductor-Conductor) |
| 파동 임피던스 | ≥ 62 Ω (f = 10 MHz) |
| AWG 신호선 | 22 |
| 기사 수정 | 10 |
| 접촉 재료 | CuZn |
| 난연성 | in accordance with UL 758/1581 FT2 |
| 헤드 나사형 | M12 |
| 기타 저항 | Highly resistant to acids, alkaline solutions and solvents |
| 연결 방식 | Cable connection |
| 헤드 케이블 출력부 | straight |
| 헤드 잠금형 | SPEEDCON |
| 내유성 | in accordance with DIN EN 60811-2-1 |
| 조임 토크 | 3 Nm ... 4 Nm (Installation-side) |
| 도체 재료 | Bare Cu litz wires |
| 접촉 저항 | ≤ 3 mΩ |
| 공칭 전류 IN | 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) |
| 공칭 전압 UN | 250 V |
| 작동 시 주의 사항 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 주문 정보: | Lock nut is included in the scope of delivery |
| 단선, 컬러 | brown, white, blue, black |
| 특수 속성 | Flexible cable conduit capable |
| 오염 정도 | 3 |
| 치수 도면 | |
| 직위 수 | 4 |
| 정격 서지 전압 | 2.5 kV |
| 전송 매체 | Copper |
| 보호 수준 | IP67 (When plugged in) |
| 케이블 콘센트 개수 | 1 |
| 과전압 범주 | II |
| 표준 명칭 | M12 connector |
| 절연 저항 | ≥ 100 MΩ |
| 두께, 절연 | ≥ 0.21 mm |
| 외부 덮개, 색상 | black-gray RAL 7021 |
| 공칭 전압, 케이블 | ≤ 300 V |
| 외부 덮개, 재질 | PUR |
| 도체 단면적 | 4x 0.34 mm² (Signal line) |
| 접점 연결 유형 | Pin |
| 외부 케이블 직경 | 4.95 mm ±0.2 mm |
| 광학 차폐 커버 | 80 % |
| 두께, 외피 | approx. 0.50 mm |
| 접촉 캐리어 재료 | PA 6.6 |
| 접촉면 재질 | Au |
| 재질 전선 절연 | PP |
| 표준/사양 | IEC 61076-2-101 |
| 최대 도체 저항 | max. 58 Ω/km (at 20 °C) |
| 삽입/제거 주기 | > 100 |
| 나사 연결용 재료 | Zinc die-cast, nickel-plated |
| 절연체를 포함한 전선 직경 | 1.27 mm ±0.02 mm (Signal line) |
| 주변 온도(작동) | -40 °C ... 80 °C (cable, fixed installation) |
| 도체 구조 신호선 | 42x 0.10 mm |
| 동적 하중 용량(굽힘) | Max. bending cycles: 10000000, Bending radius: 10 x D, Traversing path: 10 m, Traversing rate: 3 m/s, Acceleration: 10 m/s² |
| UL 94에 따른 난연성 등급 | V0 |
| 최소 굽힘 반경, 고정 설치 | 25 mm |
| 최소 굽힘 반경, 유연한 설치 | 10 x D |
| 최소 굽힘 반경, 이동식 설치 | 50 mm |
기술 사양 및 성능 데이터
설치 및 운영 가이드