서비스 시간: 월요일 ~ 금요일 9:00-18:00
UERXC02 - UERXC02 ER-XC02 PANASONIC Controller for ER-X-ionizer-heads, number of heads connected max. 2 units, power s..
재고 있음 인기 제품

UERXC02

UERXC02 ER-XC02 PANASONIC Controller for ER-X-ionizer-heads, number of heads connected max. 2 units, power s..

$0.00USD
3181개 재고
주요 사양
목:Specifications
무게:Net weight : 130 g approx.
세부:Controller
제품:Pulse AC Method Area Ionizer
공급업체 정보
PANASONIC
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원

기술 사양

매개변수가치
Specifications
무게Net weight : 130 g approx.
세부Controller
제품Pulse AC Method Area Ionizer
재료Enclosure: ABS
지표Displays status of Head 1 and 2
부속품Power supply / I/O connector: 1 set (Housing 5557-10R, Terminal 5556TL [manufactured by Molex])Ground wire (3.7 m 12.139 ft approx.): 1 pc.
부품 번호ER-XC02
제품명Pulse AC Method Area Ionizer ER-X
제품 번호ER-XC02
공급 전압24 V DC ±10 %
주변 습도35 to 65 % RH, Storage: 35 to 85 % RH
충격 저항100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
외함 접지Floating
주변 온도0 to +50 °C +32 to +122 °F (No dew condensation),Storage: -10 to +65 °C +14 to +149 °F
현재 소비량450 mA or less when connecting 1 heads, 800 mA or less when connecting 2 heads
표시기: 레벨 미터Green LED (5 levels, lights up depending on amount of the charge or ion generation)
진동 저항10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each
절연 저항20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
적용 가능한 규정CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada)
표시: 확인 (CHECK)Orange LED (lights up when dirt, wear, etc. of the discharge needle is detected)
지표: 오류(ERROR)Red LED (lights up when abnormal discharge is detected)
전압 내성1,000 V AC for one min. between all supply terminals connected together and enclosure
연결된 헤드 수Maximum 2 units
지표: 방전(DSC)Green LED (lights up when discharging)
방전 제어 입력(DSC OFF)Discharge allowed: Open,Discharge halt: 24 V or 0 V shorted
출력[경보, 오류, COM(공통)]PhotoMOS relay output• Maximum load current: 100 mA• Applied voltage: 30 V DC or less (between output-output common)• Residual voltage: 1.5 V or less (at load current of 100 mA)
출력[알람, 오류, COM(공통)]:출력 작업ALARM:ON when dirt or wear of the discharge needle is detected;OFF when operation is normal.ERROR:OFF when abnormal discharge is detected;ON when operation is normal.
출력[ALARM, ERROR, COM(공통)]: 단락 보호Incorporated (automatic reset type)

제품 설명

Controller for ER-X ionizer, number of sensor heads to connect max. 2 pcs., 24VDC power supply
주요 기능
  • 산업 등급 품질
  • RoHS 준수
  • CE 인증
  • 1년 보증

제품 문서

데이터시트

기술 사양 및 성능 데이터

사용자 매뉴얼

설치 및 운영 가이드

Top