


| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 산출 | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current) |
| 세부 | Chemical-resistant |
| 제품 | Leak Detection Sensor |
| 재료 | Enclosure: PFA |
| 보호 | IP67 (IEC) |
| 부품 번호 | EX-F62-PN |
| 제품명 | Leak Detection Sensor EX-F70/EX-F60 |
| 응답 시간 | 50 ms or less |
| 제품 번호 | EX-F62-PN |
| 감지 대상 | Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc.Note : Highly viscous liquid may not be detected stably.Note : The agents mentioned above are examples. For details, please contact our office.Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office. |
| 공급 전압 | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| 연장 케이블 | Extension up to total 50 m164.042 ft |
| 오류 표시기 | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 방출 요소 | Infrared LED (non-modulated) |
| 정상 지표 | Green LED (lights up when the sensor is mounted properly) |
| 주변 조도 | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| 주변 온도 | -10 to +60 ℃+14 to +140 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃- 4 to +158 ℉Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| 현재 소비량 | 15 mA or less |
| 출력:출력 작업 | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| 출력: 단락 보호 | Incorporated |
기술 사양 및 성능 데이터
설치 및 운영 가이드