


| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 케이블 | 0.15 mm24-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m6.562 ftlong |
| 산출 | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 26.4 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
| 세부 | Thru-beam type |
| 제품 | Amplifier Built-in Ultra-compact Laser Sensor |
| 재료 | Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate |
| 종범 | MS-EXL2-2 (Mounting plate): 2 pcs. |
| 보호 | IP67 (IEC) |
| 부품 번호 | EX-L211-P-C5 |
| 제품명 | Amplifier Built-in Ultra-compact Laser Sensor EX-L200 |
| 반복성 | Perpendicular to sensing axis: 0.05 mm0.0020 inor less |
| 응답 시간 | 0.5 ms or less |
| 감지 범위 | 1 m3.281 ft |
| 제품 번호 | EX-L211-P-C5 |
| 감지 대상 | Opaque object of ø2 mmø0.079 inor more |
| 공급 전압 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 연장 케이블 | Extension up to total 50 m164.042 ftis possible with 0.3 mm2, or more, cable (thru-beam type: Total 100 m328.084 ftboth emitter and receiver). |
| 전원 표시등 | Green LED (lights up when the power is ON) (incorporated on the emitter) |
| 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 방출 요소 | Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB/ EN/ KS) (Note:This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH(Center for Devices and Radiological Health) under the FDA (Food and Drug Administration)(Maximum output: 1 mW, Peak emission wavelength: 655 nm0.026 mil) |
| 충격 저항 | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| 주변 조도 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 주변 온도 | -10 to +55 ℃+14 to +131 ℉(No dew condensation or no icing condition),Storage: -30 to +70 ℃-22 to +158 ℉ |
| 현재 소비량 | Emitter: 10 mA or lessReceiver: 10 mA or less |
| 작동 표시기 | Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
| 안정성 지표 | Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) |
| 감도 조절기 | Continuously variable adjuster (incorporated on the receiver) |
| 진동 저항 | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude (10 G max.) in X, Y and Z directions for two hours each |
| 절연 저항 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 규정 준수 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| 출력:출력 작업 | Light-ON / Dark-ON selectable by the output operation switching input |
| 전압 내성 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 방출 지점 크기(일반적) | Approx. 6 × 4 mm0.236 × 0.157 in(vertical × horizontal)(at a sensing distance of 1 m) |
| 출력: 단락 보호 | Incorporated (short-circuit protection / inverse polarity protection) |
| 최소 감지 대상 (일반적) | Opaque object of ø0.3 mmø0.012 in(Note)Typical values when the sensitivity adjuster is optimally adjusted. |
| 반복성(일반적인 값)(감지 축에 수직 방향) | 0.01 mm0.0004 inor less(all area)(Note)Typical values when the sensitivity adjuster is optimally adjusted. |
기술 사양 및 성능 데이터
설치 및 운영 가이드