재고 있음 인기 제품
UFX101Z
UFX101Z FX101Z FX-101-Z PANASONIC Fiber amplifier, Standard type, NPN, display, M8-connector type
$0.00USD
4586개 재고
주요 사양
목:Specifications
산출:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current)
무게:Net weight: 15 g approx.Gross weight: 35 g approx.
세부:Standard type
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 산출 | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| 무게 | Net weight: 15 g approx.Gross weight: 35 g approx. |
| 세부 | Standard type |
| 제품 | Digital Fiber Sensor |
| 재료 | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| 종범 | FC-FX-1(Protection cover): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| 부품 번호 | FX-101-Z |
| 케이블 길이 | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| 제품명 | Digital Fiber Sensor FX-100 |
| 응답 시간 | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| 외부 입력 | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +2 V DC(Source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| 제품 번호 | FX-101-Z |
| 공급 전압 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 타이머 기능 | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| 디지털 디스플레이 | 4 digits (green) + 4 digits (red) LCD display |
| 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 충격 저항 | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| 연결 방식 | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| 전력 소비량 | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| 주변 조도 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 주변 온도 | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| 작동 표시기 | Orange LED (lights up when the output is ON) |
| 감도 설정 | 2-point teaching / Limit teaching / Full-auto teaching |
| 진동 저항 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| 절연 저항 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 출력:출력 작업 | Selectable either Light-ON or Dark-ON, at SET mode |
| 전압 내성 | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 방출 소자(변조됨) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CE 마크 지침 준수 | EMC Directive, RoHS Directive |
| 출력: 단락 보호 | Incorporated |
| 배출량 설정 기능 | 3-level + Auto setting (from production in December 2007) |
| 간섭 방지 기능 | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| 미세 감도 조절 기능 | Incorporated |
제품 설명
FX100 Amplifier F. Optical, NPN output, includes M8 connector
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
