서비스 시간: 월요일 ~ 금요일 9:00-18:00
UFX501P - UFX501P FX-501P PANASONIC Fiber amplifier, PNP, 1 digital output, double display, connector type
재고 있음 인기 제품

UFX501P

UFX501P FX-501P PANASONIC Fiber amplifier, PNP, 1 digital output, double display, connector type

$0.00USD
3186개 재고
주요 사양
목:Specifications
케이블:-
산출:PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
무게:Net weight: 15 g approx.Gross weight: 70 g approx.
공급업체 정보
PANASONIC
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원

기술 사양

매개변수가치
Specifications
케이블-
산출PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
무게Net weight: 15 g approx.Gross weight: 70 g approx.
세부Standard type
제품Digital Fiber Sensor
재료Enclosure, Case cover: PolycarbonateSwitch: Polyacetal
종범FX-MB1 (Amplifier protection seal): 1 set
보호IP40 (IEC)
부품 번호FX-501P
제품명Digital Fiber Sensor FX-500 Ver.2
응답 시간H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable
외부 입력-
제품 번호FX-501P
공급 전압12 to 24 V DC+10-15 % Ripple P-P 10 % or less
타이머 기능Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective
연장 케이블-
다양한 설정Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.
전력 소비량Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
주변 온도-10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉
감도 설정2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
출력:출력 포인트1 point
출력:출력 작업Switchable either Light-ON or Dark-ON by L/D mode
타이머 기능: 타이머 주기Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually
방출 소자(변조됨)Red LED (Peak emission wavelength: 643 nm0.025 mil)
CE 마크 지침 준수EMC Directive, RoHS Directive
출력: 단락 보호Incorporated
배출량 설정 기능Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]
간섭 방지 기능Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12
가능한 외부 입력 함수-
입사광 강도 표시 범위H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999
외부 입력(출력 2와 전환 가능)-

제품 설명

FX-500 Amplifier F. Optical, PNP output, dual display, high sensitivity and detection distance, ultra-fast.
주요 기능
  • 산업 등급 품질
  • RoHS 준수
  • CE 인증
  • 1년 보증

제품 문서

데이터시트

기술 사양 및 성능 데이터

사용자 매뉴얼

설치 및 운영 가이드

Top