


| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 케이블 | - |
| 무게 | Net weight: 15 g approx.Gross weight: 70 g approx. |
| 세부 | 2-output type |
| 제품 | Digital Fiber Sensor |
| 재료 | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| 종범 | FX-MB1 (Amplifier protection seal): 1 set |
| 보호 | IP40 (IEC) |
| 부품 번호 | FX-502 |
| 제품명 | Digital Fiber Sensor FX-500 Ver.2 |
| 응답 시간 | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| 외부 입력 | - |
| 제품 번호 | FX-502 |
| 공급 전압 | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| 타이머 기능 | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
| 연장 케이블 | - |
| 다양한 설정 | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| 전력 소비량 | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
| 출력 1, 출력 2 | NPN open-collector transistor- Maximum sink current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 25 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| 주변 온도 | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| 감도 설정 | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| 타이머 기능: 타이머 주기 | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| 방출 소자(변조됨) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CE 마크 지침 준수 | EMC Directive, RoHS Directive |
| 배출량 설정 기능 | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| 간섭 방지 기능 | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| 출력 1, 출력 2: 출력 포인트 | 2 points |
| 가능한 외부 입력 함수 | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable |
| 출력 1, 출력 2: 출력 작업 | Switchable either Light-ON or Dark-ON by L/D mode |
| 입사광 강도 표시 범위 | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| 외부 입력(출력 2와 전환 가능) | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)- Input impedance: 10 kOhm approx. |
| 출력 1, 출력 2: 단락 보호 | Incorporated |
기술 사양 및 성능 데이터
설치 및 운영 가이드