재고 있음 인기 제품
UHGS1010AC
UHGS1010AC HG-S1010-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00USD
4292개 재고
주요 사양
목:Specifications
주목:Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
뇌졸중:10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
무게:Net weight: 80 g approx.
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 주목 | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| 뇌졸중 | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| 무게 | Net weight: 80 g approx. |
| 세부 | Air-driven type10 mm0.394 intype General purpose |
| 제품 | Contact-Type Digital Displacement Sensor |
| 재료 | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| 종범 | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| 해결 | 0.5 μm0.02 mil |
| 부품 번호 | HG-S1010-AC |
| 제품명 | Contact-Type Digital Displacement Sensor HG-S |
| 사용 가능한 유체 | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| 샘플링 속도 | 1 ms |
| 제품 번호 | HG-S1010-AC |
| 적용 가능한 튜브 | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| 측정력 | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| 측정 범위 | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| 접지 방법 | Capacitor grounding |
| 오염도 | 2 |
| 핫 스왑 기능 | Incorporated |
| 작동 고도 | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| 작동 표시기 | Equipped (2-color LED: Orange / Green) |
| 팁 편차량 | 35 μm1.378 mil(typical value) |
| 적용 가능한 컨트롤러 | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| 절연 저항 | 100 MΩ or more at 250 V DC |
| 규정 준수 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| 작동 압력 범위 | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| 표시 정확도(PP) | Full range: 2.0 μm0.079 milor lessLimited range: 1.0 μm0.039 milor less(any 60 μm2.362 mil) |
| 위치 감지 방법 | Optical absolute linear encoder method |
| 압력에 저항하는 능력 | 0.2 MPa |
| 환경 저항성: 보호 | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| 환경 저항성: 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 환경 저항성: 충격 저항성 | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| 환경 저항성: 주변 온도 | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| 환경 저항성 : 진동 저항성 | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
제품 설명
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.5μm. Precision 2μm. Range 10mm
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
