재고 있음 인기 제품
UHGTC111P
UHGTC111P HG-TC111-P PANASONIC HG-T Laser Sensor Displacement. Controller slave high functionality, PNP outp..
$0.00USD
4922개 재고
주요 사양
:When communication unitis connected
목:Specifications
케이블:0.15 mm27-core composite cable, 2 m6.562 ftlong
세부:Slave unit / High performance type
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| When communication unitis connected | |
| 목 | Specifications |
| 케이블 | 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| 세부 | Slave unit / High performance type |
| 제품 | Controller |
| 재료 | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| 순중량 | 140 g approx. |
| 부품 번호 | HG-TC111-P |
| 1~7개 단위 | 1 to 6 units |
| 제품명 | Thru-beam Type Digital Displacement Sensor HG-T |
| 8~15개 단위 | 7 to 14 units |
| 표시 범위 | -199.999 to 199.999 mm-7.874 to 7.874 in |
| 샘플링 속도 | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| 제품 번호 | HG-TC111-P |
| 공급 전압 | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| 오염도 | 2 |
| 디스플레이 해상도 | 1 μm0.039 mil |
| 작동 고도 | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| 현재 소비량 | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| 규정 준수 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| 적용 가능한 센서 헤드 | HG-T1010、HG-T1110 |
| 외부 입력 스위칭 | Input 1, Input 2, and Input 3 can be switched to "Preset / Reset / Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset, Trigger)", or "Laser emission stop". |
| 외부 출력 스위칭 | Output 1, Output 2, and Output 3 can be switched to 3-value, 2-value, Logic, and Logic 2. |
| 평균 횟수(응답 시간) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| 연결된 슬레이브 유닛 수 | Maximum sink current and sourcecurrent of control output |
| 환경 저항성: 보호 | IP40(IEC) |
| 아날로그 출력: 아날로그 전류 출력 | •Current output range: 4 to 20 mA/F.S. (default value)•Linearity: ±0.25 % F.S.•Output when alarm occurs: 0 mA•Load impedance: 250 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| 아날로그 출력: 아날로그 전압 출력 | •Voltage output range: 1 to 5 V/F.S. (default value)•Linearity: ±0.05 % F.S.•Output when alarm occurs: 5.2 V•Output impedance: 100 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| 외부 입력(입력 1, 입력 2, 입력 3) | Non-contact input or NPN open-collector transistor•Input conditionsInvalid: +8 V to +V DC or open, Valid: 0 to +1.2 V DC•Input impedance: 10 kΩ approx.Non-contact input or PNP open-collector transistor•Input conditionsInvalid: 0 to +0.6 V DC or open, Valid: +4 V to +V DC•Input impedance: 10 kΩ approx. |
| 연결 가능한 컨트롤러의 최대 개수 | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| 환경 저항성: 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 환경 저항성: 충격 저항성 | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| 제어 출력(출력 1, 출력 2, 출력 3) | NPN open-collector transistor•Maximum sink current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 1.5 V or less (at 50 mA sink current)•Leakage current: 0.1 mA or lessPNP open-collector transistor•Maximum source current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and +V)•Residual voltage: 1.5 V or less (at 50 mA source current)•Leakage current: 0.1 mA or less(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| 환경 저항성: 주변 온도 | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| 환경 저항성 : 진동 저항성 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| 환경 저항성 : 절연 저항 | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 환경 저항성: 전압 내성 | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
| 외부 입력(입력 1, 입력 2, 입력 3): 입력 시간 | • Trigger input: 2 ms or more (ON)• Laser emission stop input, preset input, reset input, bank input A/B(Note): 20 ms or more (ON)(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| 제어 출력(출력 1, 출력 2, 출력 3): 경보 출력 | Open when alarm occurs |
| 제어 출력(출력 1, 출력 2, 출력 3) : 판단 출력 | N.O. / N.C. switching type |
| 제어 출력(출력 1, 출력 2, 출력 3): 단락 보호 | Incorporated (automatic reset type) |
제품 설명
HG-T Laser Displacement Sensor. High Functionality Slave Controller, PNP Output
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
