재고 있음 인기 제품
UHLAC1
UHLAC1 HLAC1 HL-AC1 PANASONIC HL-T1 sensor controller, NPN, 12-24VDC
$0.00USD
3192개 재고
주요 사양
목:Specifications
유형:NPN output
무게:Net weight: 140 g approx.
세부:Controller (NPN output)
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 유형 | NPN output |
| 무게 | Net weight: 140 g approx. |
| 세부 | Controller (NPN output) |
| 제품 | Ultra-compact Laser Collimated Beam Sensor |
| 재료 | Enclosure: Polybutylene terephthalateTransparent cover: Polycarbonate |
| 입출력 케이블 | 0.09 mm210-core composite cable, 2 m6.562 ftlong |
| 부품 번호 | HL-AC1 |
| 입력을 재설정합니다. | 0 V connection: EffectiveOpen: Ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less) |
| 제품명 | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
| 타이밍 입력 | 0 V connection: EffectiveOpen: Ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less) |
| 선형 출력 | Current / voltage output switchable (Note)-During current output: 4 to 20 mA/F.S., Maximum load resistance: 300 Ohm-During voltage output: plus or minus 4 V/F.S., Output impedance 100 Ohm(In the monitor focus function, it can also be set at plus or minus 5 V, 0 to 5 V, etc.)(Note) Switching between current and voltage is accomplished by a switch on the bottom of the controller. |
| 주요 기능 | ・Measured value display・Setting value, light amount value resolution display・Standard received light setting・Automatic scaling・Scaling・Display reverse・ECO display・Display digits limitation・Sample hold・Peak hold・Bottom hold・Peak to peak hold・Self peak hold・Self bottom hold・Zero reset・Initial reset・ON-delay timer・OFF-delay timer・One-shot timer・Differentiation・Sensitivity selection・Threshold value direct setting・Positioning teaching・2-point teaching・Automatic teaching・Hysteresis width variability・Monitor focus・Non-measuring time setting・(A – B) calculation(Note：The calculation unit is necessary.)・(A + B) calculation(Note：The calculation unit is necessary.)・Mutual interference prevention (Note：The calculation unit is necessary.)・Laser deterioration detection・Key lock・Zero reset memory |
| 제품 번호 | HL-AC1 |
| 공급 전압 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 레이저 OFF 입력 | 0 V connection: Laser emission haltOpen: Laser emission-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less) |
| 측정 주기 | 150 micro s |
| 오염도 | 3 (industrial environment) |
| 제로 리셋 입력 | 0 V connection: Zero reset operatesOpen: Zero reset ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less) |
| 현재 소비량 | 190 mA or less (when connected to the sensor head) |
| I/O 케이블 연장 | Extension up to total 10 m32.808 ftis possible, with 0.09 mm2or more, cable.(Note) If the extension cable is longer than 10 m32.808 ft, then it will not qualify for CE marking. |
| 서브디지털 디스플레이 | 5 digit yellow LED display[RUN mode: Either the resolution or laser beam reception amount will be displayed. THR mode: The threshold value will be displayed., Reverse mode: The display orientation will be reversed.] |
| 메인 디지털 디스플레이 | 5 digit red LED display[RUN mode: Either the measured value (mm) or the hold value will be displayed. Reverse mode: The display orientation will be reversed.] |
| 절연 저항 | 20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| 적용 가능한 센서 헤드 | HL-T1001A/T1001F, HL-T1005A/T1005F, HL-T1010A/T1010F |
| 전압 내성 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 표시기: 활성화(ENABLE) | Green LED (lights up during normal operation) |
| 지표: 판단 결과 | HIGH: Orange LED (lights up when measured value > HIGH threshold value)PASS: Green LED (lights up when HIGH threshold value >= measured value >= LOW threshold value)LOW: Yellow LED (lights up when LOW threshold value > measured value) |
| 표시기: 제로 리셋(ZERO) | Green LED (lights up when the zero reset function is enabled) |
| 설정 가능한 평균 샘플링 속도 | 1 / 2 / 4 / 8 / 16 / 32 / 64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096(Note) The judgment output and linear output and linear output response time is calculated by (Measuring cycle) x (Set average sampling rate + 1). |
| CE 마크 지침 준수 | EMC Directive, RoHS Directive |
| 평가 결과 (높음, 통과, 낮음) | NPN open-collector transistor-Maximum sink current: 50 mA-Applied voltage: 30 V DC or less (between judgment output and 0 V)-Residual voltage: 1.2 V or less (at 50 mA sink current) |
| 표시등: 레이저 발광(LD ON) | Green LED (lights up during laser emission) |
| 환경 저항성: 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 환경 저항성: 충격 저항성 | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| 선형 출력: 온도 특성 | plus or minus 0.2 % F.S./℃(Note) These are the temperature characteristics of the linear output when the sensor head is connected. |
| 환경 저항성: 주변 온도 | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| 환경 저항성 : 진동 저항성 | 10 to 150 Hz frequency, 0.7 mm0.028 indouble amplitude in X, Y and Z directions for 80 min. |
| 판단 출력(HIGH, PASS, LOW): 출력 연산 | HIGH: ON when measured value > HIGH threshold valuePASS: ON when HIGH threshold value >= measured value >= LOW threshold valueLOW: ON when LOW threshold value > measured value |
| 판단 결과 출력(높음, 통과, 낮음): 출력 개수 | HIGH / PASS / LOW 3 values output |
| 평가 결과(높음, 통과, 낮음): 활용 범주 | DC-12 or DC-13 |
| 판단 출력(HIGH, PASS, LOW): 단락 보호 | Incorporated |
제품 설명
HLT1 Series Controller, 12-24 VDC Power, NPN Digital Output, Selectable Analog Output between 4-20mA and ±4V
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
