재고 있음 인기 제품
UHLC2CEP
UHLC2CEP HL-C2CE-P PANASONIC Control unite HL-C2, low resolution, -5 to +5V, 4-20mA, PNP-type
$0.00USD
4400개 재고
주요 사양
목:Specifications
무게:450 g approx.
세부:Controller
제품:Ultra High-speed High-precision Laser Displacement Sensor
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 무게 | 450 g approx. |
| 세부 | Controller |
| 제품 | Ultra High-speed High-precision Laser Displacement Sensor |
| 재료 | Case: Polycarbonate |
| 종범 | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc. |
| 부품 번호 | HL-C2CE-P |
| 입력을 재설정합니다. | Reset is done when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 알람 출력 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between alarm output and +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 제품명 | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| 타이밍 입력 | ON at/during connection to external power (+)(depending on analysis mode)Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 샘플링 속도 | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| 스트로브 출력 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between strobe output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 제품 번호 | HL-C2CE-P |
| 공급 전압 | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| 제로 설정 입력 | Zero set is ON when connected with external power (+).Zero set turns to OFF after continuously connected to external power (+) for one second.Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| 표시등: 전원 | Green LED (lights up at power on) |
| 현재 소비량 | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| 표시기: 알람 1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| 표시기: 알람 2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| 레이저 제어 입력 | Laser emission is stopped when connected to external power (+).Laser is emitted immediately after opened.Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 메모리 변경 입력 | Memory is specified when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 커넥터 센서 헤드 | Number of connectable units: Max. 2 units. |
| 원격 연동 입력 | Laser emission is delayed when connected to IL (+).Laser emission stop at openApplied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| 아날로그 출력: 전류 | Current output scale: 4 to 20 mA/F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| 아날로그 출력: 전압 | Voltage output scale: -5 to +5 V/F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mV, Linearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| 판단 결과 (HI, GO, LO) | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between judgment output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 알람 출력: 출력 작동 | Opened when the amount of light is insufficient |
| 스트로브 출력: 출력 작동 | Opened at data determination |
| 경보 출력: 단락 보호 | Incorporated |
| 스트로브 출력: 단락 보호 | Incorporated |
| 표시기: 센서 헤드 A 레이저 방사 | Green LED (lights up during or immediately before laser emission of sensor head A) |
| 표시기: 센서 헤드 B 레이저 방사 | Green LED (lights up during or immediately before laser emission of sensor head B) |
| 환경 저항성: 주변 습도 | 35 to 85 %RH |
| 환경 저항성: 충격 저항성 | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| 환경 저항성: 주변 온도 | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| 판단 결과 출력(HI, GO, LO): 출력 작업 | Opened at output operation |
| 환경 저항성 : 진동 저항성 | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| 판정 출력(HI, GO, LO): 단락 보호 | Incorporated |
제품 설명
High performance analog laser low resolution controller, HL-C2 series, RS232 port, analog output ±5V/ 4 - 20mA, PNP digital output
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
