재고 있음 인기 제품
UHLT1001A
UHLT1001A HLT1001A HL-T1001A PANASONIC HL-T1 sensor heads, 1mm type
$0.00USD
3030개 재고
주요 사양
목:Specifications
유형:Beam diameter dia.1 mm dia.0.039 in type
케이블:0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong
무게:Emitter: 15 g approx.Receiver: 15 g approx.
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 유형 | Beam diameter dia.1 mm dia.0.039 in type |
| 케이블 | 0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong |
| 무게 | Emitter: 15 g approx.Receiver: 15 g approx. |
| 세부 | Sensor head (Beam diameter dia.1 mm dia.0.039 in type) |
| 제품 | Ultra-compact Laser Collimated Beam Sensor |
| 재료 | Enclosure: PolyetherimideCase cover: PolycarbonateFront cover: Glass |
| 종범 | MS-HLT1-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiverCN-HLT1-1(Sensor head to controller connection cable): 1 cableLaser beam alignment sticker: 2 pcs.Label set (FDA regulations conformed type only): 1 set |
| 부품 번호 | HL-T1001A |
| 제품명 | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
| 감지 범위 | ■■【In the case of(0 to 500 mm 0to 19.685 in)】■■Sensing width:ø1 mmø0.039 inMin. sensing object:ø8 micro mø0.315 milopaque objectRepeatability (During the state in which light is half blocked):4 micro m0.157 mil(Note：In case of an average sampling rate of 64 times.)Linear output resolution:4 micro m0.157 mil(Note) In case of an average sampling rate of 64 times.(Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width.(Note：This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mmø0.039 in.)■■【In the case of (500 to 2,000 mm19.685 to 78.74 in)】■■Sensing width:ø1 to ø2.5 mmø0.039 to ø0.098 inMin. sensing object:ø50 micro mø1.969 milopaque objectRepeatability (During the state in which light is half blocked): -Linear output resolution: -- |
| 제품 번호 | HL-T1001A |
| 연장 케이블 | Extension up to total 10 m32.808 ftis possible, with the optional cable. |
| 오염도 | 3 (industrial environment) |
| 배출 지표 | Green LED (lights up during laser emission) |
| 적용 가능한 컨트롤러 | HL-AC1, HL-AC1P |
| 절연 저항 | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 전압 내성 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| CE 마크 지침 준수 | EMC Directive, RoHS Directive |
| 간섭 방지 기능 | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| 환경 저항성: 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 환경 저항성: 충격 저항성 | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| 환경 저항성: 주변 조도 | Incandescent light: 10,000 liter x or less at the light-receiving face |
| 환경 저항성: 주변 온도 | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| 환경 저항성 : 진동 저항성 | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| 방출 요소: FDA 규정 준수 유형 | Red semiconductor laser Class II (FDA)(modulated, max. output: 0.2 mW, peak emission wavelength: 650 nm0.026 mil)(IEC / JIS: Class 1) |
| 방출 소자: IEC/JIS 표준 준수형 | Red semiconductor laser Class 1 (IEC / JIS)(modulated, max. output: 0.2 mW, peak emission wavelength: 650 nm0.026 mil) |
제품 설명
HLT1 Series Analog Barrier Laser Emitter-Clevy, 1 mm Beam Width, 2 m Range
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
