재고 있음 인기 제품
ULS401PC2
ULS401PC2 LS401PC2 LS-401P-C2 PANASONIC Laser Amplifier (with display), cable 2m, 2 outputs PNP
$0.00USD
3563개 재고
주요 사양
목:Specifications
케이블:0.15 mm25-core cabtyre cable, 2 m6.562 ftlong
무게:Net weight: 65 g approxGross weight: 75 g approx
세부:Amplifier (Cable type)
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 케이블 | 0.15 mm25-core cabtyre cable, 2 m6.562 ftlong |
| 무게 | Net weight: 65 g approxGross weight: 75 g approx |
| 세부 | Amplifier (Cable type) |
| 제품 | Digital Laser Sensor |
| 재료 | Enclosure: Heat-resistant ABSTransparent cover: PolycarbonatePush button switch: AcrylicJog switch: ABS |
| 부품 번호 | LS-401P-C2 |
| 제품명 | Digital Laser Sensor LS-400 |
| 응답 시간 | 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch |
| 모드 표시기 | RUN: Green LEDTEACH, L/D, TIMER, CUST, PRO: Yellow LED |
| 제품 번호 | LS-401P-C2 |
| 공급 전압 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 타이머 기능 | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. |
| 연장 케이블 | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| 디지털 디스플레이 | 4 digit (green) + 4 digit (red) LED display |
| 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 표시기를 선택하세요 | Yellow LED(lights up when either output 1 or output 2 is selected) |
| 충격 저항 | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| 주변 온도 | -10 to +55 ℃+14 to +131 ℉(If 4 to 7 units are mounted close together: -10 to +50 ℃+14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃+14 to +113 ℉)(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| 현재 소비량 | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
| 작동 표시기 | Orange LED (lights up when output 1 and output 2 are ON) |
| 감도 설정 | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustmentWindow comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentHysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentDifferential mode: 5-level settings |
| 타이머 기능: 시간 | 1 to 9,999 ms |
| 진동 저항 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| 절연 저항 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 레이저 방출 표시기 | Green LED (lights up during laser emission) |
| 전압 내성 | 1,000 V AC for one min.between all supply terminals connected together and enclosure |
| 출력(출력 1, 출력 2) | PNP open-collector transistor- Maximum source current: 100 mA (Note)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less [at 100 mA (Note) source current](Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade. |
| 미세 감도 조절 기능 | Incorporated |
| 자동 간섭 방지 기능 | Incorporated[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)] |
| 출력(출력 1, 출력 2):출력 작업 | Selectable either Light-ON or Dark-ON, with jog switch |
| 출력(출력 1, 출력 2): 단락 보호 | Incorporated |
| 외부 입력(레이저 방출 정지, 완전 자동 티칭/리미트 티칭) | PNP non-contact input- Signal conditionHigh: +4 V to +V DC (sink current 3 mA or less), Low: 0 to +0.6 V DC or open- Input impedance: 10 kOhm approx. |
제품 설명
LS400 series digital laser amplifier, PNP, cable
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
