

| 매개변수 | 가치 |
|---|---|
| 깊이 | 146 mm |
| 너비 | 61 mm |
| 키 | 126 mm |
| 고도 | ≤ 2000 m |
| 격리 | Reinforced insulation |
| 제품 유형 | Relay Module |
| 장착 유형 | DIN rail mounting |
| 구성 요소 포함 | yes |
| 오염도 | 2 |
| 연결 방식 | IDC/FLK pin strip |
| 장착 위치 | any |
| 작동 시 주의 사항 | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| 직위 수 | 14 |
| 정격 서지 전압 | 6 kV (1.2/50 μs) |
| 보호 수준 | IP00 |
| 과전압 범주 | III |
| 연결 수 | 1 |
| 표준/규정 | DIN EN 50178: 1998-04 |
| 접점 스위칭 방식 | Single contact, 1 changeover contact |
| 공칭 입력 전압 UN | 24 V DC (±10 %) |
| 정격 절연 전압 | 260 V |
| 최대 스위칭 전압 | 150 V AC/DC (Maximum switching voltage of 230 V AC: the maximum switching voltage of 230 V is only permitted if the same fuse circuit is used. The outputs are not suitable for switching different outer conductors.) |
| 도체 단면적 AWG | 24 ... 12 |
| 연속 전류 제한 | 4 A |
| UN에서의 일반적인 입력 전류 | 200 mA (200 mA supply / ≤ 20 mA input current per signal) |
| 도체 단면 강성 | 0.2 mm² ... 2.5 mm² |
| 주변 온도(작동) | -20 °C ... 50 °C |
| 도체 단면적 유연함 | 0.2 mm² ... 2.5 mm² |
| 표준에 따른 연결 | IEC 60603-13 |
| 보호 등급 (설치 위치) | ≥ IP54 (Installation location) |
기술 사양 및 성능 데이터
설치 및 운영 가이드