


| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 케이블 | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| 산출 | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| 무게 | Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx. |
| 세부 | NPN output |
| 제품 | Small / Slim Object Detection Area Sensor |
| 재료 | Enclosure: Heat-resistant ABSLens: AcrylicIndicator cover: Acrylic |
| 보호 | IP62 (IEC) |
| 부품 번호 | NA1-11 |
| 제품명 | Small / Slim Object Detection Area Sensor NA1-11 |
| 요소 피치 | 10 mm0.394 in |
| 응답 시간 | In Dark state: 5 ms or lessIn Light state: 10 ms or less |
| 감지 범위 | 0.17 to 1 m0.558 to 3.281 ft(Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
| 제품 번호 | NA1-11 |
| 높이 감지 | 100 mm3.937 in |
| 감지 대상 | ø13.5 mmø0.531 inor more opaque object(Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
| 공급 전압 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 연장 케이블 | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
| 주변 습도 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 방출 요소 | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
| 오염도 | 3 (Industrial environment) |
| 충격 저항 | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| 표시기:이미터 | Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) |
| 주변 조도 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 주변 온도 | -10 to 55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| 현재 소비량 | Emitter: 80 mA or lessReceiver: 100 mA or less |
| 표시기:수신기 | Operation indicator: Orange LED (lights up when the output is ON)Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) |
| 진동 저항 | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| 절연 저항 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 출력:출력 작업 | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
| 전압 내성 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 출력: 활용 범주 | DC-12 or DC-13 |
| CE 마크 지침 준수 | EMC Directive, RoHS Directive |
| 출력: 단락 보호 | Incorporated |
| 송신/수신 요소의 수 | 11 Nos. each on the emitter and the receiver, respectively |
기술 사양 및 성능 데이터
설치 및 운영 가이드