재고 있음 인기 제품
USF4DF55
USF4DF55 SF4D-F55 PANASONIC Safety light curtain type 4, version 2, finger protection 550mm, PNP/NPN, connec..
$0.00USD
4033개 재고
주요 사양
목:Specifications
PFHD:2.66×10-9
MTTFD:447 years or more
주목:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years).
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| PFHD | 2.66×10-9 |
| MTTFD | 447 years or more |
| 주목 | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years). |
| 세부 | Min. sensing object ø14 mmø0.551 in(10 mm0.394 inbeam pitch) |
| 제품 | Safety Light Curtain [Type 4 PLe SIL3] |
| 재료 | Enclosure : Aluminum, Detection surface : Polycarbonate resin and stainless steel (SUS304), Upper cap / lower cap : Nylon |
| 부속품 | SF4B-TR14 (test rod) : 1 pc. |
| 부품 번호 | SF4D-F55 |
| 제품명 | Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D |
| 안전 상태 | Control output (OSSD 1 / 2) OFF state |
| 전력 전압 | 24 V DC+20-30 %Ripple P-P 10 % or less (excluding voltage drop due to cable)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| 제품 번호 | SF4D-F55 |
| 하위 시스템 유형 | Type B (IEC 61508-2) |
| 연장 케이블 | Total length of emitter / receiver can be extended up to 70 m229.659 fteach using optional mating cable (including the lengthof series mating cables)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| 음소거 기능 | Incorporated (12-core cable) |
| 작동 범위 | Short mode : 0.2 to 7 m0.656 to 22.966 ftLong mode : 0.8 to 12 m2.625 to 39.370 ft(selectable by DIP switch)(Note): The operating range is the possible setting distance between the emitter and the receiver. |
| 방출 요소 | Infrared LED (peak emission wavelength : 850 nm0.0335 mil) |
| 오염도 | 3 |
| 연결 방식 | By connector |
| 오버라이드 함수 | Incorporated (12-core cable) |
| 보호 높이 | 550 mm21.654 in(Note): When using as a safety device for a press machine in China, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
| 인터록 기능 | Incorporated [Manual reset / auto reset (selectable by wiring)] (8-core cable or 12-core cable) |
| 작동 고도 | 2,000 m6,561.68 ftor less(Note): Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| 선택적 기능 | Fixed blanking function, floating blanking function, interlock setting function, external device monitoring setting function, auxiliary output settingfunction, application indicator setting function, muting setting function, override setting function, protect function, cable switching function(Note): To use optional functions, the SF4D-TM1 (optional) and Configurator Light Curtain setting software are required. |
| 주변 조도 | Incandescent light : 5,000 ℓx or less at the light-receiving surface |
| 현재 소비량 | Emitter : 120 mA or lessReceiver : 140 mA or less |
| 최소 감지 객체 | ø14 mmø0.551 inopaque object(Note): When the floating blanking function is used, the size of the minimum sensing object varies. For the detail, refer to the section on Safety distance. |
| 절전 기능 | Incorporated |
| 테스트 입력 함수 | Incorporated |
| 빔 채널 수 | 55 |
| 오류 응답 시간 | Within response time (OFF response) |
| 동기화 방법 | Line synchronization / optical synchronization (selectable by DIP switch) |
| 유효 개구각 | ±2.5° or less at a sensing range of 3 m9.843 ftor longer (based on IEC 61496-2) |
| 잠금 해제 기능 | Incorporated |
| T1 (검증 테스트 간격) | 20 years |
| 적용 표준: 중국 | GB/T 4584 |
| 적용 기준: 일본 | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 3 (SIL3) |
| 적용 표준: 유럽 | EN ISO 13849-1:2015 (Category 4, PLe), EN 55011, EN 61000-6-2, EN IEC 63000 |
| SFF(안전 실패율) | 99% |
| 애플리케이션 표시 기능 | Incorporated (only the receiver lights up when optical synchronization is used) |
| HFT(하드웨어 내결함성) | 1 |
| 제어 출력(OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 350 mA・Applied voltage : Same as supply voltage(between control output and +V)・Residual voltage : 2 V or less (source current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less<NPN output selected>・Maximum sink current : 350 mA・Applied voltage : Same as supply voltage(between control output and 0 V)・Residual voltage : 2 V or less (sink current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less |
| 간섭 방지 기능 | <Not connected in series/parallel>・Line synchronization : 2 units or less (auto)・Optical synchronization : 2 units or less (selectable by DIP switch)<Connected in series/parallel>・Series connection : 5 units or less (total number of beam channels 256 or less)・Parallel connection : 3 units or less (total number of beam channels 192 or less)(Note)・Series / parallel connection mixed : 5 units or less (total number of beam channels 144 or less)(Note)(Note): The setting can be changed when the SF4D-TM1 (optional) and Configurator Light Curtain setting software are used. |
| 적용 표준: 북미 | ANSI/UL 61496-1/2 (Type 4),CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2 |
| 외부 장치 모니터링 기능 | Incorporated (8-core cable or 12-core cable) |
| 무게(송신기와 수신기의 총합) | 1,300g approx. |
| 적용 가능한 규정 및 인증 | CE Marking (Machinery Directive, EMC Directive, RoHS Directive) , UKCA Marking (Machinery Regulations, EMC Regulations, RoHS Regulations), TÜV SÜD certification (U.S.A., Canada), OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06, Korea KCs mark |
| 보조 출력(AUX)(비안전 출력) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and +V)・Residual voltage : 2 V or less (source current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)<NPN output selected>・Maximum sink current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and 0 V)・Residual voltage : 2 V or less (sink current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state) |
| 환경 저항성: 주변 습도 | 30 to 85 % RH, Storage : 30 to 95 % RH |
| 환경 저항성: 충격 저항성 | 300 m/s2acceleration (30 G approx.) in X, Y, and Z directions three times eachMalfunction resistance 100 m/s2acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each |
| 적용 표준: 국제 표준 | IEC 61496-1/2 (Type 4), ISO 13849-1:2015 (Category 4, PLe), IEC 61508-1 to 3 (SIL3) |
| 제어 출력(OSSD 1, OSSD 2):응답 시간 | OFF response : 10 ms or less (Not connected in series / parallel), 18 ms or less (Connected in series / parallel)(Note 1)ON response : 50 ms or less (Note 2)(Note 3)(Note 1): For response times by number of beams, refer to the Control output (OSSD 1, OSSD 2) OFF response times.(Note 2): Because the control output (OSSD 1, OSSD 2) must be OFF for at least 80 ms, the ON response will be delayed more than 50 ms when the light blocked time is less than 30 ms.(Note 3): When optical synchronization is selected, if the beam axes of both the top end and bottom end are blocked, the ON response speed decreases by as much as 1 sec. |
| 환경 저항성: 주변 온도 | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage : -25 to +60 ℃-13 to +140 ℉ |
| 환경 저항성: 보호 정도 | IP67, IP65 (IEC), NEMA Type 13 (NEMA 250) |
| 환경 저항성: 진동 저항성 | 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions for two hours eachMalfunction resistance 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions twenty times each |
| 환경 저항성: 절연 저항 | 20 MΩ, or more, with 500 V DC megger, between all supply terminals connected together and enclosure |
| 제어 출력(OSSD 1, OSSD 2): 작동 모드 | ON when all beams are received, OFF when one or more beams are blocked(Also OFF when internal sensor error or synchronization signal error occurs)(Note): The setting can be changed when the SF4D-TM1 (optional) and Configurator Light Curtain setting software are used. |
| 제어 출력(OSSD1, OSSD2): 보호 회로 | Incorporated |
| 환경 저항성: 전압 내성 | 1,000 V AC for one minute, between all supply terminals connected together and enclosure |
| 보조 출력(AUX)(비안전 출력): 응답 시간 | OFF response : 60 ms or less, ON response : 60 ms or less |
| 보조 출력(AUX)(비안전 출력): 작동 모드 | Control output ON : OFF, Control output OFF : ON(Note): The setting can be changed when the SF4D-TM1 (optional) and Configurator Light Curtain setting software are used. |
| 보조 출력(AUX)(비안전 출력): 보호 회로 | Incorporated |
| 보호 높이: 중국 프레스 기계의 안전 장비로 사용할 때 | 540 mm21.260 in(Note): When using as a safety device for a press machine in China, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
제품 설명
SF4D Safety Barrier Category 4 Ple SIL 3, Version 2, "Finger" Protection, 550mm Height Protected, Selectable, PNP/NPN, Connector, Operating Range 0.8 to 12m, IP67, IP65 (IEC), NEMA Type 13 (NEMA 250)
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
