재고 있음 인기 제품
USFDWL3
USFDWL3 SFD-WL3 PANASONIC IO-Link communication unit for SF4D, 8-wire M12 connector
$0.00USD
3017개 재고
주요 사양
목:Specifications
주목:Use the safety light curtain monitoring information obtained via IO-Link only for diagnostic purposes. Do not use it for safety control purposes.
무게:270 g approx.
제품:IO-Link communication unit for safety light curtain SF4D series
공급업체 정보
PANASONIC
제품: 4316
보통 2-3 영업일 내에 발송됩니다
품질 보장
빠른 배송
기술 지원
기술 사양
| 매개변수 | 가치 |
|---|---|
| 목 | Specifications |
| 주목 | Use the safety light curtain monitoring information obtained via IO-Link only for diagnostic purposes. Do not use it for safety control purposes. |
| 무게 | 270 g approx. |
| 제품 | IO-Link communication unit for safety light curtain SF4D series |
| 재료 | Main unit case: PA66 (with glass)Base plate: SPCC + PlatingProduct model nameplate: PolyesterExternal connection connector: Brass + Plating |
| 함수 | • IO-Link communication function• Safety light curtain setting data copy function (Note)Note :• The internal memory (nonvolatile) of this product has a service life. Settings cannot be configured more than 100,000 times.• This product cannot be used to directly enter settings from the IO-Link master unit to a safety light curtain using IO-Link communication.• The safety light curtain setting data copy function is designed only for use in maintenance / replace of safety light curtains.Use the copy function only for loading the setting data of the previous safety light curtain to a new unit. Loading the data to a device other than a newly installed safety light curtain may result in improper device operation.• This function cannot be used unless the product is connected with the IO-Link master unit and IO-Link communication is used. |
| 부품 번호 | SFD-WL3 |
| 제품명 | IO-Link Communication Unit |
| 제품 번호 | SFD-WL3 |
| 주변 습도 | 30 to 85% RH, Storage: 30 to 95% RH |
| 오염도 | 3 |
| 작동 고도 | 2,000 m6561.68 ftor lessNote : Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| 주변 온도 | -10 to +55℃14 to 131℉(No dew condensation or icing allowed),Storage: -25 to +60℃-13 to 140℉ |
| 보호 수준 | IP64 |
| 적용 가능한 규정 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| 과전압 범주 | I |
| 연결 가능한 장치 수: 이 제품 | 1 unit |
| 환경 저항성: 충격 저항성 | 300 m/s2acceleration (30 G approx.) in X, Y, and Z directions three times eachMalfunction resistance 100 m/s2acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each |
| 공급 전압: IO-Link 통신 측 | 24V DC+20-25% Ripple P-P 10 % or less |
| 연결 방식: IO-Link 통신 측 | 4-core cable with M12 connector (commercially available product) |
| 환경 저항성 : 진동 저항성 | 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions for two hours eachMalfunction resistance 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions twenty times each |
| 전류 소모량: IO-Link 통신 측 | 30 mA or less |
| 환경 저항성 : 절연 저항 | 20 MΩ or more, with 500 V DC megger, between all supply terminals connected together and enclosure |
| 통신 방식: IO-Link 통신 측 | IO-Link specifications: Ver. 1.1Baud rate: COM3 (230.4 kbps)Data length: 18 bytes, process data (PD)Minimum cycle time: 1.5 ms |
| 연결: 안전 광전식 커튼 통신측 | 8-core cable for safety light curtain (optional) |
| 환경 저항성: 절연 강도 전압 | 1,000 V AC for one minute, between all supply terminals connected together and enclosure |
| 공급 전압: 안전 광전식 커튼 통신측 | 24V DC+20-30% Ripple P-P 10 % or less |
| 전류 소모량: 안전 라이트 커튼 통신측 | 15 mA or less |
| 통신 방식: 안전 광전식 커튼 통신측 | RS-485 bidirectional communication (dedicated protocol) |
| 연결 가능한 장치 수: 직렬 연결된 안전 라이트 커튼 | Up to 5 units (total number of beam channels 256 or less) |
제품 설명
SFD-WL3_IO-Link communication unit for safety light curtain SF4D series_IO-Link Communication Unit
주요 기능
- 산업 등급 품질
- RoHS 준수
- CE 인증
- 1년 보증
제품 문서
데이터시트
기술 사양 및 성능 데이터
사용자 매뉴얼
설치 및 운영 가이드
