

| 매개변수 | 가치 |
|---|---|
| 50 V DC (Power and data) | |
| 코딩 | Y |
| 재료 | Zinc die-cast (nickel-plated) |
| 차폐된 | yes |
| 케이블 타입 | Ethernet hybrid |
| 케이블 길이 | 3 m |
| 제품 유형 | Circular connectors (device side) |
| 장착 유형 | Rear mounting |
| 밀봉재 | FKM |
| 파동 임피던스 | 100 Ω |
| AWG 신호선 | 26 |
| 케이블 구조 | 2x2xAWG26 + 1x4xAWG20 |
| AWG 전원 공급 장치 | 20 |
| 접촉 재료 | CuZn |
| 도체 재료 | Bare Cu litz wires |
| 접촉 저항 | ≤ 3 mΩ |
| 공칭 전류 IN | 6 A (Power) |
| 공칭 전압 UN | 48 V AC (Power and data) |
| 작동 시 주의 사항 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 단선, 컬러 | Ethernet: white/orange-orange, white/green-greenPower: white, blue, brown, black |
| 케이블 단면적 | 0.15 mm² |
| 오염 정도 | 3 |
| 직위 수 | 8 |
| 정격 서지 전압 | 0.8 kV |
| 전송 매체 | Copper |
| 보호 수준 | IP67 |
| 과전압 범주 | III |
| 절연 저항 | ≥ 100 MΩ |
| 외부 덮개, 색상 | black RAL 9005 |
| 외부 덮개, 재질 | PUR mixture halogen-free |
| 테스트 전압 코어/코어 | 1.5 kV AC (Core - core) |
| 외부 케이블 직경 | 7.60 mm |
| 접촉 캐리어 재료 | PPA |
| 접촉면 재질 | Au |
| 시험 전압 코어/쉴드 | 1.50 kV AC (Line-shield) |
| 삽입/제거 주기 | ≥ 100 |
| 절연체를 포함한 전선 직경 | 1.05 mm |
| 주변 온도(작동) | -40 °C ... 90 °C (fixed routing) |
| 도체 구조 신호선 | 4x 1.05 mm |
| 도체 구조, 전압 공급 | 4x 1.40 mm |
| UL 94에 따른 난연성 등급 | V0 |
| 전송 특성(범주) | CAT5 (IEC 11801:2002) |
| 최소 굽힘 반경, 이동식 설치 | min. 110 mm |
기술 사양 및 성능 데이터
설치 및 운영 가이드